Alpha to Focus on Auto Assembly Materials at SMTA Guadalajara Expo and Tech Forum


Reading time ( words)

Alpha Assembly Solutions will exhibit its innovative assembly and connecting materials for the automotive market at the 2018 SMTA Guadalajara Exhibition and Tech Forum being held November 14-15 at the Expo Guadalajara in Guadalajara, Mexico. 

As the electronic content of automobiles continues to expand, Alpha is engineering materials to meet changing needs of the automotive industry.  For in-cabin electronics, Alpha will promote its low-temperature solder pastes, such ALPHA OM-550, and its high-performance fluxes, including ALPHA EF-6000 and ALPHA EF-6808HF.  During the expo, Alpha will have copies for review of I-Connect007’s The Printed Circuit Assembler’s Guide to... Low Temperature Soldering which was recently published and written by low-temperature solder experts from Alpha. 

For electronic systems with higher reliability and safety requirements, Alpha will feature its family of low voiding, high reliability solder alloys and solder pastes including its new ALPHA® OM-358, OM-353,CVP-390, and InnoLot alloy. “Both the automotive electronics assembly market in Mexico and the electrification of automobiles continue to expand at a rapid pace,“ said Robert Wallace, Regional Marketing Manager for the Americas, “Alpha has products, processes, and support teams that can meet our customers‘ needs for performance, reliability, and low-cost of ownership.“

Alpha will also highlight its Recycling Services program. Alpha recycles scrap solder paste, debris, dross, and other tin-bearing materials from manufacturers throughout North America, and recently expanded its recycling capabilities throughout Mexico, having received an export license from SEMARNAT, the Department of Environment and Natural Resources in Mexico, to handle and transport nationalized scrap material.  As North America’s largest solder recycler, Alpha takes pride in having the safest, most efficient, environmentally-compliant recycling solution that sends no materials to landfills.

Please visit Alpha at booth #49 and for additional information about Alpha’s industry-leading products and services, please click here.

Share

Print


Suggested Items

3D Optical Inspection Provides ‘Eyes’ for Process Improvements in Industry 4.0

06/21/2019 | Jenny Yuh, Koh Young Technology, and Brent Fischthal, Koh Young America
Automated 3D solder paste inspection (SPI) and 3D automated optical inspection (AOI) systems have become an integral part of the printed circuit board assembly (PCBA) process because they help ensure high-quality production. As today’s board complexity is increasing, inspection technology has become even more critical.

Goepel electronic Solutions, Webinar Series, and Trends

06/19/2019 | Barry Matties, I-Connect007
Barry Matties catches up with Matthias Müller to chat about the wide range of test and inspection solutions currently being offered by Goepel electronic as well as the informative webinar series produced by the company to help further educate their customer base and promote technical discussion on a number of topics.

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.



Copyright © 2019 I-Connect007. All rights reserved.