Indium Marks 15th Anniversary of Live@APEX at IPC APEX EXPO


Reading time ( words)

Indium Corporation will observe the 15th anniversary of its Live@APEX program in 2019, featuring its proven products live on the show floor throughout IPC APEX EXPO from January 29-31 in San Diego, California, USA.

Launched in 2004, Live@APEX is a joint effort between Indium Corporation and its industry partners. By demonstrating Indium Corporation products on live equipment at the APEX show, attendees get an accurate and honest depiction of the material’s performance.

This year’s program will highlight Indium Corporation materials, such as:

  • Indium8.9HF Solder Paste
  • Core 230-RC No-Clean Flux-Cored Solder Wire
  • Solder Fortification Preforms

Live@APEX benefits all participants, including Indium Corporation, its industry partners, and, most importantly, the customers who get to experience the equipment and materials in a live-action environment.

To learn more about the Live@APEX program, contact Miloš Lazić, technical support engineer or visit Indium Corporation at booth #3133.

Share

Print


Suggested Items

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

Reflow Your Solder and Your Data for Industry 4.0

06/11/2019 | Nolan Johnson, I-Connect007
I-Connect007 Managing Editor Nolan Johnson recently spoke with KIC President and Founder Phil Kazmierowicz and Manager of Applications and Sales MB “Marybeth” Allen as they each transitioned into new roles in the KIC leadership team. The conversation ultimately turned to the current dynamics in the industry, particularly Industry 4.0 and streamlining processes.

Laserssel Brings High-speed Soldering to New Application Areas

06/10/2019 | Barry Matties, I-Connect007
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.



Copyright © 2019 I-Connect007. All rights reserved.