Dymax Introduces BlueWave MX-275


Reading time ( words)

Dymax introduces the BlueWave MX-275 high-intensity flood-curing system. Its light energy is delivered in a line pattern instead of the traditional round spot or rectangular flood-curing patterns, to allow for consist curing of batches of parts for maximum productivity.

The system utilizes BlueWave RediCure, PrimeCure, or VisiCure emitters (365, 385, or 405 nm) to quickly cure light-curable materials. A single emitter provides a 5 mm x 50 mm curing area, but when paired with a multichannel controller, up to four emitters can be used to produce a curing area as large as 5 mm x 200 mm.  It offers very high uniformity across the entire cure area and multiple emitters can be positioned to assure uniform curing across the entire multiple-emitter curing area.

This system’s wavelength flexibility (365, 385, and 405 nm) allows co-optimization of adhesive and curing system for optimal cure results. As with other emitters from the MX product family, the BlueWave MX-275 can be set up as a bench-top unit, on an array stand to create extended line patterns, or installed on automated curing processing equipment for maximum flexibility. Emitters can also be paired with MX-series single or multichannel controllers.

Share

Print


Suggested Items

ASM Assembly Solutions on CFX

07/16/2018 | Barry Matties, I-Connect007
ASM Assembly Solutions was one of the 30+ companies participating in IPC's CFX (Connected Factory Exchange) showcase at the recent SMT Hybrid Packaging show in Nuremberg, Germany. In this interview, ASM's Thomas Marktscheffel shared his perspective on CFX and its current challenges, and dispelled the notion that CFX might be a cookie-cutter approach to the smart factory.

Optimal Electronics Sets Sight on Growth

11/14/2017 | Stephen Las Marias, I-Connect007
In an interview with SMT Magazine, Dr. Ranko Vujosevic, CEO and CTO of Optimal Electronics, speaks about the latest technology developments at his company, and his plans to sustain growth. He also talks about his paper on lights-out electronics assembly, the technologies that would support this vision, and the ultimate goal of Industry 4.0.

Koh Young Discusses Latest 3D AOI Innovations

06/16/2017 | Stephen Las Marias, I-Connect007
Koh Young Technology's Scott Kim, overseas sales team manager, talks about the latest challenges and developments happening in inspection technologies, the new demands and requirements from customers, as well as the key factors to consider when it comes to buying inspection systems.



Copyright © 2019 I-Connect007. All rights reserved.