Indium Expert to Present at IMAPS France Workshop


Reading time ( words)

Indium Corporation’s Tim Jensen, product manager for engineered solder materials, will present on liquid metal interface technology during IMAPS France’s 14th European Advanced Technology Workshop on Micropackaging and Thermal Management, February 6-7 in La Rochelle, France.

Jensen’s presentation, Innovative Liquid Metal Interface Technology for TIM2 Applications, will examine methodologies and techniques that can enable liquid metal to be used in a higher array of TIM2 applications. Jensen will also address factors limiting the adoption of liquid metal TIMS, including the difficulty of applying a significant amount of liquid metal in high volume and containing the liquid metal under the heat-sink.

Jensen is an SMTA-certified process engineer. He has more than 20 years of experience working with customers to troubleshoot and optimize SMT process lines and solving defects, such as head-in-pillow, graping, and QFN voiding. Jensen has worked directly on hundreds of surface mount lines and developed a number of different products. Using that direct knowledge and expertise, he works closely with Indium Corporation’s technical service, sales, and research and development teams to develop cutting-edge products that address the unique challenges faced by the electronics assembly industry. As senior product manager, Jensen is responsible for Indium Corporation’s most diverse product group, which includes solder preforms, wire, ribbon and foil, and thermal interface materials. He earned his bachelor’s degree in chemical engineering from Clarkson University and his master’s in business administration from Syracuse University.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

Share

Print


Suggested Items

Mentor and Seica Partner for Data Prep and Testing Big Boards

01/18/2019 | Pete Starkey, I-Connect007
Mark Laing, business development manager of the Valor division at Mentor, a Siemens company, and Luca Corli, director of sales at Seica, speaks with I-Connect007 Technical Editor Pete Starkey about the partnership between their two companies, which enables efficient data preparation for testing big boards, and accelerates new product introduction (NPI) cycles.

Solder Paste Selection/Qualification

01/16/2019 | Stephen Las Marias, I-Connect007
In a recent SMT007 survey, we asked the following question: " What are your challenges when it comes to solder paste selection/qualification?" Here are just a few of the replies, slightly edited for clarity.

Who’s the Best of the Best in Hand Soldering?

01/11/2019 | Nolan Johnson, I-Connect007
IPC APEX EXPO 2019 will include the new IPC World Championship Hand Soldering and Rework Competition on the expo floor on January 29 and 30. Twelve competitors from Britain, China, France, Germany, India, Indonesia, Japan, South Korea, and Thailand will compete for the crown and the title of the first-ever IPC World Hand Soldering and Rework Champion.



Copyright © 2019 I-Connect007. All rights reserved.