Nordson DIMA to Demonstrate Hot Bar Reflow Soldering and Automated Flux Dispensing with the C-TurnFlux System at IPC APEX EXPO 2019


Reading time ( words)

Nordson DIMA, a division of Nordson Corporation, will exhibit its C-TurnFlux system, the automated stand-alone hot bar system that combines flux dispensing with hot bar reflow soldering, at the IPC APEX Expo, San Diego, California - its first live demonstration in North America. The C-TurnFlux combines both high output and quality, using high-speed product handling and guaranteed position repeatability for mission-critical assembly applications.

The C-TurnFlux hot bar reflow system is used to solder a range of assemblies, such as an LCD with flex attached to a PCB, multiple wires to a PCB board, or connectors and other components. It enables soldering for processes that require two soldering connections per product or simultaneous soldering of two small products.

The heating process is easy to program using pulsed heat technology. Short heating and cool-down times result in extremely short process cycles. Thermode/hot bar design offers an easy, fast, and reliable exchange of thermodes and ensures co-planarity of solder joints. The programmable automated flux dispensing process with constant fluid dispense volumes contributes to consistent product quality.

The C-TurnFlux system has two configurations. One has two soldering heads and automated flux dispensing for high-throughput, high-volume manufacturing. The second has one soldering head with automated flux dispensing and one quality inspection module for applications that demand higher quality and output.

About Nordson DIMA

Nordson DIMA serves the global market with hot bar bonding and soldering application solutions and offers a range of dispensing and coating products exclusively for the European region. The customer-inspired systems support a range of different industries, like electronics, automotive, medical, aerospace, defense, and solar/energy. The company offers a wide variety of solutions, ranging from high quality standard systems and process equipment to completely automated production lines; from concept discussions to global installation and production ramp up. 

About Nordson Corporation

Nordson Corporation is one of the world's leading producers of precision dispensing equipment that applies adhesives, sealants, coatings, and other materials to a broad range of consumer and industrial products during manufacturing operations. The company also manufactures equipment used in the testing and inspection of electronic components as well as technology-based systems for curing and surface treatment processes. Headquartered in Westlake, Ohio, Nordson has direct operations and sales support offices in more than 30 countries.

Share

Print


Suggested Items

A Young Engineer’s Perspective

04/15/2019 | Barry Matties, I-Connect007
Jeffrey Diament, a recent Princeton University graduate and an engineering associate from sensor manufacturer Instrumems, talks about the company’s nanowire sensing platform that can measure velocity, temperature, and humidity. Being his first career job out of college, Diament discusses his experience on the hardware and manufacturing side of things and offers advice to other young professionals.

IPC Working to Revive Lead-Free R&D in High-Reliability Sectors

04/10/2019 | Chris Mitchell, IPC VP, Global Government Relations
Ask yourself the following question: Why is it that the aerospace, defense and high performance (ADHP) electronics sectors remain reliant on lead solders and components even as the commercial sector has largely phased out their use?

Top 10 Most-Read SMT007 Articles for March

04/01/2019 | I-Connect007
Starting this month, we will take a look back at the most popular SMT007 news, articles, interviews, and columns over the past 30 days. For the month of March, these are the top 10 most-read SMT007 articles. Check them out.



Copyright © 2019 I-Connect007. All rights reserved.