Valtronic Welcomes Three New Team Members


Reading time ( words)

Valtronic welcomes Konstanin Nakovski, mechanical engineer, Cindy Gilmore, HR/accounting assistant and Engineering Co-op Jackson Rothier to the expanding US operations.

Konstantin will be responsible for product concept design and development, detailed mechanical design of medical and industrial devices, 3D CAD modeling (SolidWorks), FEA, production of detail drawings (GD&T) and support for manufacturing transfer processes. 

Previously, Konstantin was employed with Philips Healthcare as a Mechanical Design Engineer where he was responsible for leading the mechanical design of a multi-disciplinary team for the Patient Support used on the Vereos PET/CT Scanner. Prior to Philips, Konstantin was with Blue Sky Innovation group as a product engineer, PMI Industries, Inc. as lead product engineer.

Cindy will be responsible for the administrative support of for human resource and accounting operations.  Previously, Cindy was employed with ITS traffic/trustpoint technologies as an accounting assistant. Lawn Tech as an office manager, and Triskett Road Storage as a site manager.  

Jack is a co-op student who will assist the development and process engineers in the design, testing, and manufacturing transfer of electronic assemblies. Jack attends Case Western Reserve University majoring in Biomedical Engineering with a focus on mechanics and minoring in mechanical engineering and film studies.   

About Valtronic

Valtronic designs, develops and manufactures miniaturized and complex products for medical device partners across the globe.  With facilities in Switzerland, the U.S, and Morocco we offer design and feasibility to industrialization and manufacturing, providing a full range of competences and solutions. 

Share

Print


Suggested Items

Meet Zulki Khan, SMT007 Columnist

10/25/2019 | I-Connect007
Meet Zulki Khan, one of our newest SMT007 columnists! Khan’s columns address new frontiers in upcoming manufacturing techniques, including challenges in the marriage of SMT and microelectronics manufacturing and the critical aspects involved.

The Convergence: IPC Merging CFX With IPC-2581

09/16/2019 | Andy Shaughnessy, I-Connect007
Gary Carter of XPLM and Michael Ford of Aegis Software are heading a group tasked with combining the IPC-2581 standard, now referred to as Digital Product Model Exchange (DPMX), with IPC’s Connected Factory Exchange (CFX). In this interview, they discuss the benefits that can be expected when these standards are fully merged for both PCB designers and process engineers on the manufacturing floor.

PCB Design Training: More Critical Than Ever

09/05/2019 | Andy Shaughnessy, Design007 Magazine
I interviewed Gary Ferrari of FTG at the IPC High-Reliability Forum and Microvia Summit in Baltimore. Gary is a co-founder of the IPC Designers Council and a longtime advocate for PCB design and PCB designers. We discussed the crucial role that PCB designers play in the entire electronics development process, and how IPC and the Designers Council are helping to educate and inform the next generation of designers.



Copyright © 2019 I-Connect007. All rights reserved.