Data I/O Doubles Programming Performance with TurboBoost for Lumen X Programmers


Reading time ( words)

Data I/O Corporation, the leading global provider of advanced data and security programming solutions for flash, flash-memory based intelligent devices and microcontrollers, announces the release of TurboBoost for eMMC 5.0 and 5.1 devices on the Lumen X programming platform.  Data I/O will demonstrate up to a 2x increase in programming performance using TurboBoost in booth #2015 at the IPC APEX Expo, scheduled to take place January 29th – January 31st at the San Diego Convention Center in San Diego, California.

“Programmable content for automotive electronics, driven primarily by the infotainment systems in connected and autonomous cars, is expected to exceed 1 Terabyte by 2025. Today, most OEMs pre-programming eMMC Flash are struggling to maintain production throughput as the file sizes continue to grow,” said Anthony Ambrose, president and CEO of Data I/O Corporation.   “TurboBoost for LumenX enables customers to immediately improve their programming performance, maximizing their existing investment in Data I/O’s programming technology.”

LumenX is architected to support the latest device technologies for maximum performance today and in the future including ultra-fast programming performance for eMMC devices.  The combination of TurboBoost for LumenX and the PSV programming systems with high socket capacity and high throughput allows manufacturers using one PSV system to program what previously required multiple systems to produce. 

With over 240 PSV systems installed globally, existing customers can immediately improve their production output without investing in new capital equipment.  The combination of LumenX programming technology in a PSV system delivers the maximum performance, flexibility and throughput for the lowest total cost. 

About Data I/O Corporation

Since 1972 Data I/O has developed innovative solutions to enable the design and manufacture of electronic products for automotive, Internet-of-Things, medical, wireless, consumer electronics, industrial controls and other markets. Today, our customers manufacture hundreds of millions of products each year using Data I/O programming solutions to reliably, securely, and cost-effectively bring innovative new products to life. These solutions are backed by a global network of Data I/O support and service professionals, assuring success for our customers.

Share

Print


Suggested Items

IPC’s Shawn Dubravac: COVID-19 Outbreak Accelerates Industry Shifts Already Under Way

05/21/2020 | Barry Matties, I-Connect007
On May 19, Barry Matties spoke with Shawn Dubravac, chief economist for IPC. While discussing other topics, Matties asked for Dubravac’s perspective on shifts in the market, who observed that the recessionary trend might be behind us; the markets are already showing recovery. Still, it could take a year or so to fully recover.

Happy’s Smart Factory Protocol Primer

04/29/2020 | Happy Holden, I-Connect007
The smart factory concept is built upon data interchange as the foundation. There has been much development in the area of industrial and manufacturing data protocols over the years, stretching back into the 1960s. This article by Happy Holden surveys what are considered the most common protocols in use in the electronics manufacturing industry today, including IPC-CFX/ Hermes, OML, SECS/GEM, and MAPS.

Case Study: Example of ASKEY Applying QML Validation

04/23/2020 | Edy Yu, I-Connect007
The PCB007 China team paid a visit to the ASKEY plant in Wujiang, Jiangsu, to learn more about their QML process. In this interview with Qixian Zhang, vice GM of ASKEY’s Electronics Product Quality Assurance Department, he discusses what QML means to ASKEY and the electronics industry as a whole.



Copyright © 2020 I-Connect007. All rights reserved.