Thermaltronics Receives Second Award for Full Vision Soldering Robot at IPC APEX EXPO 2019


Reading time ( words)

Thermaltronics USA, Inc. was awarded a 2019 NPI Award in the category of Soldering—Other for its TMT-R9800S Solder Robot. The award was presented to the company during a Tuesday, January 29, 2019 ceremony that took place at the San Diego Convention Center during the IPC APEX EXPO 2019. The NPI Award marks the second award for the solder robot since its introduction.

The soldering robot has an observation mode, a verification mode and decision-making capabilities. This capability to collect and utilize data for production processing is one of the most important factors necessary to meet the requirements of Industry 4.0 standards.

Thermaltronics Curie Heat Technology (CHT) responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material. The company’s hand soldering products include both 13.56 MHz and 470 kHz power supplies and are fully compatible with competitive product offerings.

Premiering in 2008, the NPI Awards program is an annual celebration of product excellence in electronics surface mount assembly. Premier products based on the finest examples of creative advancement in technology are chosen by a distinguished panel of industry experts.

About Thermaltronics USA, Inc.

Thermaltronics is a manufacturer and supplier of a wide range of soldering products and accessories used in the electronics manufacturing industry. Design and development is undertaken in the USA and Australia, with final production taking place in a customized manufacturing facility, incorporating specialized equipment and in accordance with recognized international standards of quality and compliance.

In addition to the modern factory, Thermaltronics maintains an office and warehouse in New York State, commercial offices in Hong Kong and a Distribution Sales Office in Perth Australia.

All Thermaltronics products are produced in accordance with ISO 9000 & ISO 14000 standards and meet either TUV, GS, CE or NRTL safety requirements. Strict quality control procedures are in place and product warranties are among the best in the industry.

Share

Print


Suggested Items

SMTAI 2019: Chris Bastecki on Low-temperature Solder Challenges and Products

10/14/2019 | Real Time with...SMTAI
Chris Bastecki, director of global PCB assembly at Indium Corporation, discussed challenges of low-temperature solder and the company's new product, Durafuse LT, which provides novel properties and reliability.

Real Time with... SMTAI 2019 Video Interviews

10/09/2019 | Real Time with...SMTAI
The SMTA International Conference and Exhibition 2019, which took place September 22–26, 2019, at the Donald E. Stephens Convention Center in Rosemont, Illinois, concluded successfully. For those of you who were not able to make it to the show, catch our video interviews with the movers and shakers of the electronics industry. We've updated our video presentation for a better experience for our users, so check it out!

SMTAI 2019: Happy Holden’s On-the-Scene Report

10/03/2019 | Happy Holden, I-Connect007
Last week concluded the 2019 SMTAI conference in Rosemont, Illinois. Overall, I think the show was successful and covered all aspects of SMT processes.



Copyright © 2019 I-Connect007. All rights reserved.