RTW IPC APEX EXPO 2019: LPKF on Benefits of Laser Depaneling


Reading time ( words)

Laser technology marches on, and marching along with it is LPKF's new line of laser depaneling equipment. Stephan Schmidt, president, talks with I-Connect007 Guest Editor Kelly Dack about the many benefits of using lasers including cleanliness and higher yields through increased array density.

To watch the interview, click here.

Share

Print


Suggested Items

Selecting the Proper Flex Coverlayer Material

09/06/2019 | Dave Lackey, American Standard Circuits
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.

RTW IPC APEX EXPO 2019: Joining Materials with Laser Energy

03/20/2019 | Real Time with...IPC
Kelly Dack and General Manager Denis Barbini discuss Laserssel's laser soldering equipment. Laser soldering is presented as a solution to mitigate the effects of high heat processing on printed board substrates and components by pinpointing energy where it's needed to join the metals. He talks about the challenges that their customers usually face, and how they are helping them address those by optimizing their processes. He also mentioned their device that eliminate any type of warpage.

A Review of the Opportunities and Processes for Printed Electronics (Part 2): Printing Technologies

06/24/2015 | Happy Holden, PCB Technologist-Retired
In Part 2 of this article series, Happy Holden explains that the selection of printing method to use is determined by requirements concerning printed layers and properties of printed materials, as well as economic and technical considerations for printed products.



Copyright © 2019 I-Connect007. All rights reserved.