RTW IPC APEX EXPO 2019: Advanced 3D Solder Paste Inspection Technology


Reading time ( words)

Olivier Pirou, managing director of Vi TECHNOLOGY, provides I-Connect007 Guest Editor Joe Fjelstad with an overview of the company's advanced 3D inspection technology for solder paste including the ability to make corrections in real time.

In this interview, Pirou also discusses his company's efforts in strengthening their inspection systems, particularly for the high-reliability application segments.

Click here to watch this interview.

Share

Print


Suggested Items

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.

Recent Advances in X-ray Technology: SMTA Webinar Recap

08/12/2019 | Pete Starkey, I-Connect007
Technical Editor Pete Starkey recently attended a webinar on advances in X-ray technology and its applications in the electronics industry, as presented by Keith Bryant, Chair of SMTA Europe, on behalf of SMTA India. Here are the highlights of the webinar.

Cadence Design Systems Takes Tensilica to CES Show Floor

04/26/2019 | Nolan Johnson, I-Connect007
While roaming the aisles of CES, I happened across a suite hosted by Cadence Design Systems. It wasn’t a booth—just a quiet presence behind walls with demonstration hardware inside. Vic Markarian, senior group director for worldwide IP licensing and sales, explains why Cadence was at CES.



Copyright © 2019 I-Connect007. All rights reserved.