Virtual Industries’ ADJUST-A-VAC is Ideal Solution for Handling Fragile Components


Reading time ( words)

Virtual Industries Inc. offers an ADJUST-A-VAC ESD Safe Kit with foot switch, which is the ideal solution for handling thin and delicate substrates, wafers, MEMS devices, and other fragile components.

The AV-6000-FS-SP8-BD-220 ADJUST-A-VAC ESD Safe Kit with Foot Switch features five vacuum tip holders on top of the tool, rubber no-skid feet and a side-mounted handle holder. This vacuum-tweezer is easy to operate, allowing the user to adjust the vacuum level from just below atmospheric pressure to up to 10" of mercury. The operator can see the vacuum level of the part being handled on the clear 10 segment bar graph display that is integrated into the device. The vacuum port also features a replaceable inlet filter that helps protect the tool from dust particles during operation.

The AV-6000-FS-SP8-BD-220 ADJUST-A-VAC ESD Safe Kit with Foot Switch offers 220 V operation. The kit includes a coiled vacuum hose, push-button vacuum pen, foot switch with vacuum pen without control hole, vacuum cup kit, ESD-safe Delrin small parts tips, 16 position tip organizer or holder, and a three wire power cord. Virtual Industries’ complete line of ADJUST-A-VAC kits are offered with or without the foot switch and are available in 110 or 220 V operation.

About Virtual Industries Inc.

Founded in 1987, Virtual Industries Inc. is headquartered in Colorado Springs, Colo. For more than 20 years, Virtual Industries has been a leading supplier of manual vacuum handling solutions to the world’s high-technology firms. The company’s patented ESD-safe products are used by CLASS I clean room personnel, electronics assemblers, semiconductor manufacturers, Universities and scientists globally. Virtual Industries’ success has come from developing innovative manual vacuum handling tools and pick-up tips based on customer requests and customer feed back. These tools provide customer specific solutions that make assembly and processing operations more productive and ergonomic.  

Share

Print


Suggested Items

PCB Repair: Thoughtful Best Practices

12/31/2019 | Barry Matties, I-Connect007
Barry Matties recently spoke with Curtis Smith of Huntron about the critical factors that somebody needs to understand about the plant maintenance regarding the PCB repair process. The PCB repair process is not just a matter of just getting the equipment anymore but finding the right people with a troubleshooting mindset that can do it. A failed PCB can bring down an entire manufacturing line, and companies need to be able to repair the board and keep their manufacturing going.

Koh Young Opens New North American Facility

10/28/2019 | Andy Shaughnessy
Koh Young America recently opened its new corporate headquarters for the Americas outside of Atlanta, Georgia. I attended the open house and spoke with Joel Scutchfield, director of sales for the Americas, about the state-of-the-art facility and the benefits of relocating to the East Coast.

Discover the Benefits of a Technology Center

10/23/2019 | Barry Matties, I-Connect007
Nico Fahrner, application engineer at Rehm Thermal Systems, talks with Barry Matties about the benefits prospective customers get from being able to fully test their systems in-line at Rehm’s technology centers before purchasing.



Copyright © 2020 I-Connect007. All rights reserved.