Rehm Hands Over 5000th Reflow Soldering System


Reading time ( words)

In mid-March, Rehm Thermal Systems handed over their 5000th reflow soldering system, the convection soldering system VisionXP+ to the Endress+Hauser Flowtec AG in Reinach, Switzerland. Endress+Hauser Flowtec AG was founded in 1977 and is one of today’s global leaders in the supply of flow measurement technology for use in all areas of industrial process engineering. Rehm Thermal Systems and Endress+Hauser enjoy a successful partnership reaching back over more than 20 years. A partnership that has given rise to numerous joint projects.

Endress+Hauser Flowtec AG has been developing and manufacturing industrial flowmeters for liquids, gases and steam for over 40 years, earning itself a leading position in this field. For many years now, these flowmeters have been produced using systems, supplied among others, by Rehm. Rehm Thermal Systems has already supplied the Swiss company with four ProtectoXP coating systems, two RDS 3000 drying systems, as well as four VisionXP+ convection soldering systems. A fifth VisionXP+ has now been added to this number. Endress+Hauser Flowtec’s constant line expansion indicates a course of continual growth. 

As with all systems in the VisionX series, this VisionXP+ is equipped with two tried and tested residue management systems: pyrolysis in the preheating zone, as well as cold condensation and filtering in the cooling tract. This ensures that all residue, whether in gas, liquid, crystalline or particulate form, is removed from the process gas in an energy saving and efficient way. The VisionXP+ systems from Rehm Thermal Systems in use at Endress+Hauser are also equipped with an extended 1.5 metre cooling tract (Power Cooling Unit), which allows for gentle and controlled cooling of the highly complex components. Rehm Thermal Systems can thus offer Endress+Hauser systems, on which the highest precision manufacturing is possible, consistency of top quality products can be ensured and process optimisation can be successfully put into practice.

“In Rehm we have found a reliable partner that supplies us with high quality thermal systems, on which we can manufacture our products with consistent and reliable quality. We can always rely on Rehm: for the functionality and reliability of their systems, as well as for their expertise, service and cooperation”, says Marco Nardozza, Project Manager at Endress+Hauser Flowtec, who alongside Department Manager Patric Kiener took delivery of the new VisionXP+ at Endress+Hauser Flowtec’s production site in Reinach.

The partnership between Endress+Hauser and Rehm Thermal Systems has existed for more than 20 years: “For us, Endress+Hauser Flowtec has been a business partner right from the word go. Our company always stands to gain when carrying out joint projects and exchanging knowledge with Endress+Hauser Flowtec in order to produce high quality electronics. We value this positive cooperation, are thankful for the trust invested in our company and look forward to mastering future projects together”, says Michael Hanke, Sales Director at Rehm Thermal Systems.

Rehm1.jpg

(Left to Right) Michael Hanke (Sales Director at Rehm Thermal Systems), Marco Nardozza and Markus Ursprung (both Project Manager at Endress+Hauser Flowtec) and Patric Kiener (Department Manager at Endress+Hauser Flowtec) 

REHM2.jpg

(Left to Right) Michael Hanke (Sales Director at Rehm Thermal Systems) and Marco Nardozza (Project Manager at Endress+Hauser Flowtec) 

About Rehm Thermal Systems

Rehm is a technology and innovation leader in the state-of-the-art, cost-effective manufacturing of electronic assembly groups and specialises in thermal system solutions for the electronics and photovoltaics industry. Rehm is a globally active manufacturer of reflow soldering systems using convection, condensation or vacuum, drying and coating systems, functional test systems, equipment for the metallisation of solar cells as well as numerous customised systems. We have a presence in all key growth markets and, as a partner with almost 30 years of industry experience, we are able to implement innovative production solutions that set new standards.

About Endress+Hauser Flowtec

Endress+Hauser is a leading international supplier of measurement instrumentation, services and solutions for industrial process engineering. Within the globally active Endress+Hauser group, Endress+Hauser Flowtec AG counts as one of the leading manufacturers of industrial flowmeters for liquids, gases and steam. Its leading global position has been acquired in over 40 years of experience as a centre of competence. Endress+Hauser Flowtec AG currently employs over 1800 people at six production sites in Reinach (Switzerland), Cernay (France), Greenwood (USA), Aurangabad (India), Suzhou (China) and Itatiba (Brazil).

 

Share

Print


Suggested Items

Case Study: Example of ASKEY Applying QML Validation

04/23/2020 | Edy Yu, I-Connect007
The PCB007 China team paid a visit to the ASKEY plant in Wujiang, Jiangsu, to learn more about their QML process. In this interview with Qixian Zhang, vice GM of ASKEY’s Electronics Product Quality Assurance Department, he discusses what QML means to ASKEY and the electronics industry as a whole.

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

What’s Driving AOI Innovation and Collaboration?

03/25/2020 | Brent Fischthal, Koh Young America
When we look at the optical inspection market growth trajectory, we can see how process challenges helped create innovations. For example, solder paste inspection (SPI) has undergone a shift from 2D to 3D because the 2D inspection technologies manufacturers traditionally used to collect solder deposit images could not solve shadowing problems. Thus, companies developed 3D SPI to capture the printed solder paste height to accurately measure the total volume of paste printed. Several years later, we see the same need for surface-mounted component inspection with AOI systems.



Copyright © 2020 I-Connect007. All rights reserved.