Indium to Exhibit at PCIM 2019


Reading time ( words)

Indium Corporation will feature its InFORMS ESM02, a reinforced solder fabrication designed to produce consistent bondline thickness for die-level attach applications, at PCIM 2019, May 5-7, Nuremberg, Germany.

Indium Corporation’s InFORMS ESM02 is a reinforced matrixed solder composite that produces a high-reliability solder joint with increased thermal and mechanical performance for the development of new, or the improvement of existing, applications.

Previous InFORMS technology was only applied at the baseplate level; however, new production capabilities have expanded its use to the die-level with a bondline of 50μm. Other benefits of InFORMS include:

  • Drop-in replacement for other bondline control methods
  • Increased lateral strength
  • Bondline co-planarity
  • Improved thermal cycling reliability
  • Availability in ribbon and preforms

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com.

Share

Print


Suggested Items

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

Reflow Your Solder and Your Data for Industry 4.0

06/11/2019 | Nolan Johnson, I-Connect007
I-Connect007 Managing Editor Nolan Johnson recently spoke with KIC President and Founder Phil Kazmierowicz and Manager of Applications and Sales MB “Marybeth” Allen as they each transitioned into new roles in the KIC leadership team. The conversation ultimately turned to the current dynamics in the industry, particularly Industry 4.0 and streamlining processes.

Laserssel Brings High-speed Soldering to New Application Areas

06/10/2019 | Barry Matties, I-Connect007
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.



Copyright © 2019 I-Connect007. All rights reserved.