April 17: IPC Webinar on Weak Interface/Stacked Microvia Reliability


Reading time ( words)

For the upcoming IPC Wisdom Wednesday Webinar on April 17, the topic will be on weak interface/stacked microvia reliability concerns, to be presented by Dennis Fritz, IPC V-TSL-MVIA Co-Chair. The webinar is scheduled for 10:00–10:45 am CDT.

IPC has issued an industry warning on microvia reliability for high performance products. A number of IPC OEM member companies have presented examples of microvia failures that were not observed until after bare printed board fabrication, inspection and acceptance.

This free webinar will discuss why IPC has issued this warning and will provide an overview of this problem, with examples of the different conditions of concern. It will also cover how IPC has organized to address the problem, including sub-teams formed earlier this year at IPC APEX EXPO.

To gain a deeper understanding of this issue and how it may impact the design and testing of bare boards, register today by clicking here.

Share

Print


Suggested Items

EIPC Summer Conference 2019, Day 1

09/10/2019 | Alun Morgan, EIPC
The beautiful city of Leoben in central Austria provided the setting for the EIPC 2019 Summer Conference. In this article, EIPC Chairman Alun Morgan provides the highlights of the first day of the event, including a recap of the technical presentations.

Putting Green Into a Brownfield Facility

09/05/2019 | Nolan Johnson, I-Connect007
George Milad, national accounts manager for technology at Uyemura, talks about what is driving change in the wet process marketplace and how chemistries must fit into next-generation product design while also meeting new environmental requirements.

Meet Mike Hill, I-Connect007 Columnist

09/02/2019 | I-Connect007
Mike Hill has been in the PWB fabrication industry for over 40 years. Throughout his career, he has been a member of IPC and participated in specification writing for both IPC and the military. Within IPC, he has received the President's Award, General Chairmanship, Committee Chairmanship, and many other recognitions. In his columns, Mike will help you better understand the requirements and how-to's for MIL-PRF-31032 certification for PWB fabrication.



Copyright © 2019 I-Connect007. All rights reserved.