Thermaltronics Offers Free Review and Trials of Soldering Robot


Reading time ( words)

Thermaltronics USA Inc. has announced a free “check and review” program in response to the significant increase in robotic soldering applications. The check and review process is designed to help customers determine if robotic soldering is a viable option compared to current manufacturing methods.

First, the customer provides basic information on board size, components, and process requirements in a systematic procedure. Thermaltronics will then review the data. If there is a viable solution, Thermaltronics will run trials of the soldering process using their robot and provide full video confirmation—all at no cost to the customer.

If there is agreement on the project going forward, a full demonstration of the solder robot can be arranged with the local distributor should this be required.

Thermaltronics has recognized that changing to robotic soldering is a big step for many companies and having the opportunity to gain confidence in the process is essential to ensure the best equipment is selected.

About Thermaltronics USA Inc.

Thermaltronics is a manufacturer and supplier of a wide range of soldering products and accessories used in the electronics manufacturing industry. Design and development is undertaken in the USA and Australia, with final production taking place in a customized manufacturing facility, incorporating specialized equipment and in accordance with recognized international standards of quality and compliance.

In addition to the modern factory, Thermaltronics maintains an office and warehouse in New York State, commercial offices in Hong Kong and a Distribution Sales Office in Perth Australia.

All Thermaltronics products are produced in accordance with ISO 9000 and ISO 14000 standards and meet either TUV, GS, CE, or NRTL safety requirements. Strict quality control procedures are in place and product warranties are among the best in the industry. For more information, visit www.thermaltronics.com.

Share

Print


Suggested Items

3D Optical Inspection Provides ‘Eyes’ for Process Improvements in Industry 4.0

06/21/2019 | Jenny Yuh, Koh Young Technology, and Brent Fischthal, Koh Young America
Automated 3D solder paste inspection (SPI) and 3D automated optical inspection (AOI) systems have become an integral part of the printed circuit board assembly (PCBA) process because they help ensure high-quality production. As today’s board complexity is increasing, inspection technology has become even more critical.

Goepel electronic Solutions, Webinar Series, and Trends

06/19/2019 | Barry Matties, I-Connect007
Barry Matties catches up with Matthias Müller to chat about the wide range of test and inspection solutions currently being offered by Goepel electronic as well as the informative webinar series produced by the company to help further educate their customer base and promote technical discussion on a number of topics.

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.



Copyright © 2019 I-Connect007. All rights reserved.