CyberOptics to Launch New Products at SEMICON West


Reading time ( words)

CyberOptics Corporation will exhibit at SEMICON West, July 9-11, 2019 in booth #5769 at the Moscone Center in San Francisco, California.

During the show, the company will launch its new WaferSense Auto Vibration and Leveling Sensor (AVLS3) with CyberSpectrum software. Semiconductor fabs and OEMs value the accuracy, precision and versatility of the WaferSense AVLS3—the most efficient and effective wireless measurement device for leveling andvibration.

At only 3.5mm, AVLS3 can travel with ease to most fab locations where a wafer travels. The chemically hardened glass (CHG) substrate enables smooth wafer handling and improved vacuum chucking. With long-range wireless capability, AVLS3 combined with new, easy-to-use CyberSpectrum software, collects and displays both leveling and vibration data simultaneously for fast equipment set-up, alignment and real-time equipment diagnostics.

“Engineers in the front-end of the fab can speed equipment qualification, shorten equipment maintenance cycles, lower equipment maintenance expenses and enhance process uniformity,”said Dr. Subodh Kulkarni, president and CEO, CyberOptics Corporation, “As with other WaferSense devices widely used across fabs world-wide, AVLS3 can significantly improve yields and tool uptime.”

Additionally, formid-end and advanced packaging inspection and measurement, CyberOptics will demonstrate the new proprietary NanoResolution Multi-Reflection Suppression (MRS) sensor technology that meticulously identifies and rejects multiple reflections caused by shiny components and mirror-like surfaces.

Effective suppression of multiple reflections is critical for highly accurate measurements. Offering an unparalleled combination of high accuracy, high resolution and speed, MRS sensors are widely used for inspection and measurement in the SMT, semiconductor and metrologymarkets. The new 3-micron NanoResolution MRS sensor enables metrologygrade accuracy with superior 100% 2D and 3D inspection performance for features as small as 25-micron. Further, it is two to three times faster than alternate solutions in the marketplace. With data processing speeds in excess of 75 million 3D points per second, the NanoResolution MRS sensordelivers throughput greater than 25 wafers (300mm) per hour.

100% 2D and 3D inspection can be completed simultaneouslyat high speed,versus an alternate, slow method that requires twoseparate scans for 2D and 3D, and only a sampling of a few dies of the 25 wafers. This best-in-class MRS sensor technology is ideally suited for the inspection of CPU sockets, IC package,solder balls and bumps, copper pillars, and other advanced packaging and mid-end semiconductor applications where high precision and speed are needed.

About CyberOptics

CyberOptics Corporation is a leading global developer and manufacturer of high precision sensing technology solutions. CyberOptics’ sensors are used in SMT, semiconductor and metrology markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of key vertical markets. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe.

Share

Print


Suggested Items

Advancement of SPI Tools to Support Industry 4.0 and Package Scaling

08/06/2019 | A. Prasad, L. Pymento, S.R. Aravamudhan, and C. Periasamy, Intel Corp.
This paper evaluates the current state of inline SPI tools from multiple vendors for solder paste measurement accuracy and capability. It discusses a measurement capability analysis that was carried out against a golden metrology tool across a range of volume deposits, and highlights the results from the study.

Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 2)

07/24/2019 | Adam Murling, Miloš Lazić, and Don Wood, Indium Corporation; and Martin Anselm, Rochester Institute of Technology
In the last three to five years, there has been a resurgence of interest in the use of low melting point alloys for SMT applications. Typically, the compositions are around the eutectic bismuth-tin alloy, perhaps with additions of other elements to increase the robustness of certain alloy properties. Now, there are several new products on the market and numerous ongoing reliability projects in industry consortia.

The Four Things You Need to Know About Test

07/24/2019 | Neil Sharp, JJS Manufacturing
The electronics manufacturing process can often be extremely complex, and the costs associated with product recalls can be astronomical. A robust approach to test is key to ensuring the quality of your product and the satisfaction of your end user.



Copyright © 2019 I-Connect007. All rights reserved.