Register for Reliability of Circuit Assemblies Workshops in Florida


Reading time ( words)

Registration is open for the Reliability of Circuit Assemblies Workshops to be held in Melbourne Florida (June 25), and Tampa Florida (June 27).

Speakers include Mike Konrad of Aqueous Technologies, Kalyan Nukala of Zestron, Terry Munson of Foresite, Dr. Rakesh of Specialty Coating Systems, and Tony Lentz of FCT Solder.

Each of the two workshops will cover best practice reliability-based topics including cleaning, new IPC cleanliness testing standards, conformal coating, soldering materials, failure analysis, and more.

Breakfast and lunch will be provided. Registration is free but seating is limited. Workshop information and registration are available at www.reliabilityworkshop.com

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.