GOEPEL electronic Expands Sales and Services in UK and Ireland


Reading time ( words)

The Cambridge-based GOEPEL electronics Ltd. has added a new technical sales engineer. Mark Daglish is now responsible for the company’s product ranges of embedded JTAG Solutions equipment as well as inspection solutions such as automated optical inspection (AOI), automated x-ray inspection (AXI) and solder paste inspection (SPI) systems.

Daglish is an electronics test engineer with more than 40 years’ experience in the electronics industry. He has come from GE Aviation Systems, where he was responsible for PCB assembly DfT analysis and boundary scan test development. Previous rolls have encompassed the implementation of ICT and functional board test packages whilst the roll of customer project manager at SPEA UK provided detailed insight into the application of roving probe test solutions. He is a specialist in PCB assembly test strategy selection and the integration of Embedded JTAG Solutions. Furthermore, Mark Daglish will be responsible for sales of AOI/AXI/SPI systems, addressing a hugely challenging electronics production market in the British and Irish isles.

“Joining the GOEPEL team is a truly inspiring opportunity. GOEPEL understand the challenges presented by modern electronics assembly and provide class leading solutions to address these challenges. Efficient and effective test strategies need to cover the entire defect spectrum obtaining coverage from all test operations. The GOEPEL tool range delivers throughout the PCB assembly process from 3D optical and x-ray inspection through to the structural and functional performance test made possible with embedded JTAG solutions. It’s an exciting time to be a test engineer,” said Daglish.

GOEPEL electronic is a leading provider of innovative test and inspection solutions for printed circuit board assemblies (PCBAs) and electronic devices and systems. The company is divided into four divisions:

  • Automotive Test Solutions
  • Embedded JTAG Solutions
  • Industrial Function Test
  • Inspection Solutions AOI•AXI•SPI•IVS

For more information visit www.goepel.com.

 

 

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.