Rohinni Uses CyberOptics Tech for Micro LED Manufacturing


Reading time ( words)

CyberOptics Corporation has announced that CyberOptics’ multi-reflection suppression (MRS)-Enabled SQ3000 multi-function system for automated optical inspection (AOI), solder paste inspection (SPI) and coordinate measurements (CMM) is being used for the inspection and measurement of proprietary Rohinni micro LED-based technology.

Micro LEDs developed using Rohinni’s technology can be deployed in consumer electronic devices, automotive applications and outdoor signage, among other applications. The disruptive technology enables products that are brighter, thinner, lighter and more dynamic than those currently on the market, with lower power consumption than LCD or OLED.

CyberOptics’ SQ3000 multi-function system is used for six critical in-line production process locations including incoming quality inspection of the flexible circuits, solder paste inspection, pre and post reflow AOI, coordinate measurements post placement of the LED die and final test.

 “We are happy to use the SQ3000 in our line solution to inspect various process steps because of its higher speed, higher resolution and higher accuracy with the in-line CMM capability,” said Matthew Gerber, CEO, Rohinni. “The unmatched performance and versatility of the system make it the perfect solution for our challenging application needs and stringent quality requirements.”

“We are pleased to be chosen for the inspection and metrology of Rohinni’s disruptive micro LED technology,” said Dr. Subodh Kulkarni, President and CEO, CyberOptics. “The innovation behind this flexible and thin lighting technology is extraordinary.”

The 3D SQ3000 all-in-one system can identify critical defects and measure critical parameters, providing a superior process control solution to improve yields, quality and operational efficiencies in manufacturing facilities. In addition to AOI and SPI applications, highly accurate coordinate measurements can be attained faster than a traditional Coordinate Measurement Machine (CMM)—in seconds, not hours. The world’s first high speed, in-line CMM includes an extensive software suite for metrology grade measurement on all critical points. 

About CyberOptics

CyberOptics Corporation (www.cyberoptics.com) is a leading global developer and manufacturer of high-precision 3D sensing technology solutions. CyberOptics’ sensors are used for inspection and metrology in the SMT and semiconductor capital equipment markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the Company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of key vertical markets. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe.

Share

Print


Suggested Items

Advancement of SPI Tools to Support Industry 4.0 and Package Scaling

08/06/2019 | A. Prasad, L. Pymento, S.R. Aravamudhan, and C. Periasamy, Intel Corp.
This paper evaluates the current state of inline SPI tools from multiple vendors for solder paste measurement accuracy and capability. It discusses a measurement capability analysis that was carried out against a golden metrology tool across a range of volume deposits, and highlights the results from the study.

Practical Implementation of Assembly Processes for Low Melting Point Solder Pastes (Part 2)

07/24/2019 | Adam Murling, Miloš Lazić, and Don Wood, Indium Corporation; and Martin Anselm, Rochester Institute of Technology
In the last three to five years, there has been a resurgence of interest in the use of low melting point alloys for SMT applications. Typically, the compositions are around the eutectic bismuth-tin alloy, perhaps with additions of other elements to increase the robustness of certain alloy properties. Now, there are several new products on the market and numerous ongoing reliability projects in industry consortia.

The Four Things You Need to Know About Test

07/24/2019 | Neil Sharp, JJS Manufacturing
The electronics manufacturing process can often be extremely complex, and the costs associated with product recalls can be astronomical. A robust approach to test is key to ensuring the quality of your product and the satisfaction of your end user.



Copyright © 2019 I-Connect007. All rights reserved.