ZESTRON to Exhibit at SMTA Queretara Expo


Reading time ( words)

ZESTRON will be featuring the recently released decoating cleaning agent, ATRON DC at SMTA Queretaro Expo & Tech Forum.

ATRON DC is a maintenance cleaning agent designed to remove conformal coating from pallets, fixtures and tools. It quickly and reliably removes different coating materials including acrylics, urethanes, and epoxies. The water-based, pH neutral formulation of ATRON DC has been developed to improve worker safety versus traditional solvents, ATRON® DC is suitable for use in most maintenance cleaning equipment, including dip tank and ultrasonic machines.

SMTA Queretaro Expo will be held at Hotel Misión Juriquilla on August 15. For more information or to register, please visit smta.org.

About ZESTRON

ZESTRON is headquartered in Manassas, Virginia and operates in more than 35 countries. With eight technical centers worldwide and the industry’s most knowledgeable team of engineers focused on high precision cleaning, ZESTRON’s commitment to ensuring that its customers surpass even the most stringent cleaning requirements is without equal.

For additional information or to tour one of our technical centers, please visit www.zestron.com.

Share

Print


Suggested Items

Real Time with... SMTAI 2019 Video Interviews

10/09/2019 | Real Time with...SMTAI
The SMTA International Conference and Exhibition 2019, which took place September 22–26, 2019, at the Donald E. Stephens Convention Center in Rosemont, Illinois, concluded successfully. For those of you who were not able to make it to the show, catch our video interviews with the movers and shakers of the electronics industry. We've updated our video presentation for a better experience for our users, so check it out!

IPC Panel on Bottom-terminated Components

09/27/2019 | Andy Shaughnessy, I-Connect007
During the IPC Summer Meetings in Raleigh, North Carolina, I sat down with Tom Rovere, a materials and process engineer at Lockheed Martin in Owego, New York. We explored a panel discussion on bottom-terminated components (BTCs) that Tom participated in as well as the challenges and issues related to BTCs and the important role that designers play in that process.

Automated Conformal Coating of CCAs Using Polyurethane

08/30/2019 | Marissa Pati and Ana “Lety” Campuzano-Contreras, BAE Systems
The development of an automated circuit card assembly (CCA) conformal coating process using a low-outgassing polyurethane material was essential for meeting the increase in customer demand from 3,000 to 60,000 units per year.



Copyright © 2019 I-Connect007. All rights reserved.