KATEK SE Acquires bebro electronic and eSystems MTG


Reading time ( words)

The Munich-based electronics group KATEK SE, a portfolio company of PRIMEPULSE SE, has acquired all shares of bebro electronic GmbH and eSystems MTG GmbH from MAGENWIRTH Technologies GmbH, Bad Urach, subject to the final review by the competition authorities.

The two companies will thus become the fourth and fifth members of the fast-growing KATEK SE group of companies with the existing units Steca Elektronik GmbH, Katek GmbH and ETL Elektrotechnik Lauter GmbH at the Memmingen, Grassau and Mauerstetten locations.

bebro and eSystems employ 550 people and achieve a total output of almost 90 million euros. In addition to the classic EMS business, bebro has set up the subsidiary beflex electronic GmbH at its locations in Frickenhausen and Horni Sucha (Czech Republic) with a focus on measurement technology, industry and medicine. The fast growing beflex concentrates on the business with prototypes and small series, which are produced at the three locations Frickenhausen, Munich and Witten in close cooperation with the engineers of the customers. The independent eSystems develops solutions and systems in the field of electromobility for the world’s most renowned automobile manufacturers, such as the intelligent charging of electric vehicles as part of Smart Home and Smart Grid.

KATEK is the electronics division of the technology-oriented PRIMEPULSE group of companies based in Munich, Germany. Klaus Weinmann, CEO of KATEK’s majority shareholder PRIMEPULSE SE: “The acquisition of bebro and eSystems is a further milestone to expand KATEK SE into one of the leading European service providers in the electronics sector. We will participate in the significant growth in the field of professional IoT applications as a long-term, reliable and innovative electronics partner of the European industry.”

Rainer Koppitz, CEO of KATEK SE: “We welcome bebro and eSystems to our fleet of speedboats! We see this acquisition as a decisive step in covering the entire value chain in important areas such as e-mobility and medical technology, from development to prototyping, classic EMS services, box build and after-sales service. In addition to the strong positioning in terms of content, the dynamic and committed management team convinced us right from the start.”

Share

Print


Suggested Items

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.

Recent Advances in X-ray Technology: SMTA Webinar Recap

08/12/2019 | Pete Starkey, I-Connect007
Technical Editor Pete Starkey recently attended a webinar on advances in X-ray technology and its applications in the electronics industry, as presented by Keith Bryant, Chair of SMTA Europe, on behalf of SMTA India. Here are the highlights of the webinar.

Cadence Design Systems Takes Tensilica to CES Show Floor

04/26/2019 | Nolan Johnson, I-Connect007
While roaming the aisles of CES, I happened across a suite hosted by Cadence Design Systems. It wasn’t a booth—just a quiet presence behind walls with demonstration hardware inside. Vic Markarian, senior group director for worldwide IP licensing and sales, explains why Cadence was at CES.



Copyright © 2019 I-Connect007. All rights reserved.