MIRTEC to Demo Latest 3D AOI, SPI Systems at SMTAI


Reading time ( words)

MIRTEC, “The Global Leader in Inspection Technology,” will exhibit in booth #305 at SMTA International, scheduled to take place September 24-25, 2019 at the Donald Stephens Convention Center in Rosemont, Illinois. MIRTEC will showcase the latest advancements in their award-winning 3D AOI and SPI systems at the two-day event.

“We at MIRTEC are very excited to present what are unquestionably the Inspection Industry’s most Technologically Advanced 3D AOI and 3D SPII Systems at SMTAI 2019,” said Brian D’Amico, president of MIRTEC’s North American sales and service division.

The all new MV-6 OMNI 3D AOI machine combines MIRTEC’s exclusive 15-megapixel CoaXPress camera technology with their proprietary OMNI-VISION 3D digital Tri-Frequency Moiré technology to provide precision inspection of SMT devices on finished PCB assemblies.

MIRTEC’s exclusive 15-megapixel CoaXPress camera system is designed and manufactured by MIRTEC for use with its complete product range of inspection equipment. 

MIRTEC’s proprietary digital Tri-Frequency Moiré technology provides superior 3D inspection of SMT and through-hole devices up to 25 mm tall.  This industry-acclaimed technology yields precise height measurement data used to detect lifted component and lifted lead defects as well as solder volume post reflow.  Fully configured the new MIRTEC MV-6 OMNI machines feature four 10-megapixel side-view cameras in addition to the 15-megapixel top-down camera. There is little doubt that this new technology has set the standard by which all other inspection equipment are measured.

MIRTEC’s award-winning MS-11e 3D SPI machine is configured with an exclusive 15-megapixel CoaXPress camera system, providing enhanced image quality, superior accuracy and incredibly fast inspection rates.

The MS-11e uses dual-projection shadow-free Moiré phase shift imaging technology to inspect solder paste depositions on PCBs post screen-print for insufficient solder, excessive solder, shape deformity, shift of deposition and bridging.  The MS-11e uses the same robust platform as MIRTEC’s MV-6 OMNI Series.

MIRTEC’s total quality management system software, INTELLISYS also will be on display at SMTA International. This software suite promotes continuous process improvement by allowing manufacturers to track and eliminate defects on inspected assemblies.

“MIRTEC has earned a solid reputation in the Electronics Manufacturing Industry by providing unprecedented performance, quality and cost-effectiveness to the inspection environment,” continued D’Amico. “We look forward to welcoming visitors to our booth during the two-day event.”

About MIRTEC

MIRTEC is a leading global supplier of automated inspection systems to the electronics manufacturing industry.  For further information, please visit www.mirtec.com

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.