Indium Expert to Present at ITW EAE Seminar


Reading time ( words)

Indium Corporation expert Andreas Karch, regional technical manager, Germany, Austria, and Switzerland, will present at the ITW EAE Smart Stencil Printing Solutions seminar, October 23-24, in Dreieich, Germany.

Karch’s presentation, Voiding and How to Optimize Current Printing Processes, will examine the evolution of solder paste for the elimination of voiding. He will also discuss stencil design, specifications, and other printing tips and tricks to help engineers optimize their processes.

As a Regional Technical Manager, Karch provides support, including sharing process knowledge and making technical recommendations, for the use of Indium Corporation’s solder paste, solder preforms, fluxes, and thermal management materials. He has more than 20 years of automotive industry experience in PCB assembly and power electronics, including the advanced development of customized electronics. Karch is an ECQA-certified integrated design engineer and has earned his Six Sigma Yellow Belt. He received an award for developing one of the top 10 innovative patents for automotive LED assembly. Karch maintains a thorough understanding of process technologies and project management skills.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, India, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.