AIM to Participate at SMTA New England Expo & Tech Forum


Reading time ( words)

AIM Solder has announced their participation in the upcoming SMTA New England Expo and Tech Forum taking place on October 8, 2019 at the Boxboro Regency Hotel & Conference Center in Boxboro, MA. AIM Solder will highlight its REL electronic solders and its new RX18 and CX18 cored solder wire.

REL22 is an award-winning, high reliability alloy developed to address reliability and production quality issues common to similar multi-element alloys.  Both internal and customer testing has proven that REL22 improves product survival in extreme thermal exposure operating environments such as under-hood automotive, avionics/aerospace and LED lighting. REL61 is ideally suited for industries which require a cost effective alternative to SAC305 with no loss of processing performance or durability. REL61 provides significant advantages over other no-low silver alloys by offering better flow characteristics at lower temperatures, thus reducing PCB damage and assembly costs.

AIM will also feature its new cored wire solders, RX18 and CX18. The award-winning RX18 is engineered for automated soldering and promotes thermal transfer, fast wetting and reduces voids/skips. With an operator friendly, low odor/smoke formula, CX18 extends the solder tip life and leaves clear, minimal residues.

To discover all of AIM’s products and services, visit the company at the SMTA New England Chapter Expo and Tech Forum at booth # 302 for more information and to speak with one of AIM’s knowledgeable staff members.

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, visit www.aimsolder.com.

Share

Print


Suggested Items

Clean vs. No-clean: A Generational Difference

12/24/2019 | Barry Matties, I-Connect007
Tom Forsythe, executive VP of KYZEN, discusses what readers should know about cleaning as reliability expectations continue to increase. He also explains what is driving the new interest in cleaning and why engineers from the no-clean generation may not even realize they need to learn more about cleaning.

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

BTU Discusses its Next-generation Flux Management System

12/18/2019 | Nolan Johnson, I-Connect007
At productronica 2019, Nolan Johnson spoke with Peter Franklin, managing director of BTU Europe, about BTU’s next-generation solder reflow flux management system—Aqua Scrub. A winner of the show’s Global Technology Award for Soldering, Peter breaks down the specifics of what makes Aqua Scrub such an intriguing technology.



Copyright © 2020 I-Connect007. All rights reserved.