BTU International’s New Aqua Scrub Flux Management Technology at productronica


Reading time ( words)

BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing and alternative energy markets, will exhibit at productronica, scheduled to take place November 12-15, 2019 at the Neue Messe München in Munich, Germany. The company will showcase the Aqua Scrub flux management technology installed on the PYRAMAX 125A with EPP Electronic Production Partners GmbH in hall A3, booth 154. 

Aqua Scrub Technology is BTU’s next-generation solder reflow flux management system. The patent-pending design uses an aqueous-based scrubber technology compatible with most known paste and flux types. The flux and solution are automatically contained and packaged for disposal.

The Aqua Scrub has a very attractive cost of ownership and is designed to decrease operational cost by 4X compared to traditional condensation systems. Reduction in cost can be attributed to reduced downtime, labor and disposal costs. 

The Aqua Scrub is purpose-built as a stand-alone system that can be easily retrofitted.

on PYRAMAX reflow ovens already in the field as well as being configured on new PYRAMAX ovens. This self-contained unit mounts on the back side of the oven to minimize the impact on oven operation and factory floor space.

About BTU International

BTU International, a wholly-owned subsidiary of Amtech Group (Nasdaq: ASYS), is a global supplier and technology leader of advanced thermal processing equipment in the electronics manufacturing market.  BTU’s high-performance reflow ovens are used in the production of SMT printed circuit board assemblies and in semiconductor packaging processes. BTU also specializes in precision controlled, high-temperature belt furnaces for a wide range of custom applications, such as brazing, direct bond copper (DBC), diffusion, sintering and advanced solar cell processing. BTU has operations in North Billerica, Massachusetts, and Shanghai, China, with direct sales and service in the U.S.A., Asia and Europe. Information about BTU International is available at www.btu.com.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.