AIM to Participate at SMTA Space Coast Expo & Tech Forum


Reading time ( words)

AIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce their participation in the upcoming SMTA Space Coast Expo and Tech Forum taking place on November 20, 2019 at the Melbourne Auditorium in Melbourne, FL. AIM Solder will highlight its REL electronic solders and its new RX18 and CX18 cored solder wire.

REL22™ is an award-winning, high reliability alloy developed to address reliability and production quality issues common to similar multi-element alloys. Both internal and customer testing has proven that REL22 improves product survival in extreme thermal exposure operating environments such as under-hood automotive, avionics/aerospace and LED lighting. REL61™ is ideally suited for industries which require a cost effective alternative to SAC305 with no loss of processing performance or durability. REL61 provides significant advantages over other no-low silver alloys by offering better flow characteristics at lower temperatures, thus reducing PCB damage and assembly costs.

AIM will also feature its new cored wire solders, RX18 and CX18. The award-winning RX18 is engineered for automated soldering and promotes thermal transfer, fast wetting and reduces voids/skips. With an operator friendly, low odor/smoke formula, CX18 extends the solder tip life and leaves clear, minimal residues.

To discover all of AIM’s products and services, visit the company at the SMTA Space Coast Expo and Tech Forum for more information and to speak with one of AIM’s knowledgeable staff members.

Share

Print


Suggested Items

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.



Copyright © 2020 I-Connect007. All rights reserved.