Nordson SELECT to Exhibit Selective Soldering Technology at Productronica 2019


Reading time ( words)

Nordson SELECT, a Nordson company (NASDAQ: NDSN), is pleased to announce it will exhibit its advanced selective soldering technology in Hall A2, Stand 345 at the Productronica 2019, scheduled to take place November 12-15, 2019 at the Messe Munich Convention Center in Munich, Germany.  
 
On exhibit will be the Integra® 508.2 multi-station selective soldering system designed for high-volume applications with maximum throughput.  Customers can choose between three different variants of the Integra® 508.2 to meet a broad range of selective soldering requirements. The Integra® 508.2S configuration equipped with single fluxer and solder pot provides single board processing. 
 
The Integra® 508.2PD configuration with dual drop-jet fluxers and dual solder pots allows for using two solder nozzles in the same soldering station or processing two boards in a panel simultaneously.  The Integra® 508.2PD 2seg configuration can solder two singulated boards in-line providing sequential soldering of two printed circuit boards at the same time without the need for the boards to be in a panel, to be palletized or to require tooling.  All variants of the Integra® 508.2 are available with Nordson SELECT’s unique automatic solder nozzle cleaning system, which unlike other nozzle cleaning systems, does not spray a liquid or powdered flux, or adipic acid.   
Nordson SELECT’s new FX-942 automated solder joint inspection system will be on display showcasing its dual-sided optical inspection capability of plated through-hole, SMT and PCB inspection. The FX-942 can be paired with any Nordson SELECT in-line selective soldering system and provides the ideal solution to ensure optimum solder joint integrity. 
 
Also on display will be the Novo® 460 and Novo® 300 selective soldering systems.  The Novo® 460 selective soldering system is available as a 460S and 460PD model and is one of the most flexible system in the Nordson SELECT product portfolio.  The Novo® 300 is a standalone platform ideally suited for prototype, cell manufacturing or small batch production with a compact footprint requiring less than 1.1 square meters of factory floor space. 

Share

Print


Suggested Items

Clean vs. No-clean: A Generational Difference

12/24/2019 | Barry Matties, I-Connect007
Tom Forsythe, executive VP of KYZEN, discusses what readers should know about cleaning as reliability expectations continue to increase. He also explains what is driving the new interest in cleaning and why engineers from the no-clean generation may not even realize they need to learn more about cleaning.

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

BTU Discusses its Next-generation Flux Management System

12/18/2019 | Nolan Johnson, I-Connect007
At productronica 2019, Nolan Johnson spoke with Peter Franklin, managing director of BTU Europe, about BTU’s next-generation solder reflow flux management system—Aqua Scrub. A winner of the show’s Global Technology Award for Soldering, Peter breaks down the specifics of what makes Aqua Scrub such an intriguing technology.



Copyright © 2020 I-Connect007. All rights reserved.