Würth Elektronik Expands LAN Portfolio with Super Tiny Signal Transformer


Reading time ( words)

Würth Elektronik, a leading European manufacturer of electronic and electromechanical components, is expanding its extensive range of signal transformers. The new series of WE-STST Super Tiny Signal Transformers for LAN interfaces features a maximum component height of just 2.9 mm and can be used up to 1000Base-T applications with at least 350 µH inductance. 

The WE-STST series of signal transformers is ideally suited for all applications in which small component size and outstanding electronic parameters are paramount. In contrast to conventional transformers, which usually consist of toroidal ferrites in plastic housings, the Super Tiny Signal Transformers from Würth Elektronik are manufactured completely by machine. This enables the dimensions to be kept extremely small at only 4.7 × 3.22 × 2.9 mm and yet offers an insulation voltage of 1,500 V / 1 min.

Four versions for different applications

WE-STST is available in four versions for different applications. The first version with 350 µH is suitable for LAN applications with data rates up to 1,000 Mbps. The WE-STST with 120 µH features outstanding signal integrity at high frequencies and is therefore ideal for 10 Gigabit Ethernet applications or for the new Single Pair Ethernet with data rates up to 1,000 Mbps. Further versions with 300 µH or 2,000 µH are suitable for ultrasonic sensor applications and as transformers for the new G.fast standard with a transmission ratio of 1:4.5. 

All four WE-STST versions are now available from stock without a minimum order quantity. Samples may be requested.

Share

Print


Suggested Items

What’s Driving AOI Innovation and Collaboration?

03/25/2020 | Brent Fischthal, Koh Young America
When we look at the optical inspection market growth trajectory, we can see how process challenges helped create innovations. For example, solder paste inspection (SPI) has undergone a shift from 2D to 3D because the 2D inspection technologies manufacturers traditionally used to collect solder deposit images could not solve shadowing problems. Thus, companies developed 3D SPI to capture the printed solder paste height to accurately measure the total volume of paste printed. Several years later, we see the same need for surface-mounted component inspection with AOI systems.

Semiconductors in Charge: The Changing Face of PCB Manufacturing

03/11/2020 | I-Connect007 Editorial Team
The I-Connect007 editorial team recently spoke with Chuck Bauer and Dana Korf in a technical discussion that spanned a number of topics around shrinking components, such as redistribution layers (RDLs), active embeddeds, and why even the most revolutionary technologies must show ROI to be successful.

Improving the Efficiency of Your PCBA Production

02/15/2019 | Neil Sharp, JJS Manufacturing
Ensuring you're hitting your build times is always a major priority in surface mount production. The challenge for many OEMs, however, is that the processes involved with PCBA can be numerous and complex. And the smallest of details can make the biggest of differences.



Copyright © 2020 I-Connect007. All rights reserved.