Accurate, Uniform Data With KIC’s Smart Reflow Analyzer


Reading time ( words)

During productronica 2019 in Munich, Germany, the I-Connect007 Editorial Team met with some of the industry's top executives, managers, and engineers.

In this video interview, part of the productronica 2019 coverage, the I-Connect007 team speaks with Miles Moreau, general manager of KIC Europe.

Editor Nolan Johnson and Miles discuss KIC’s newest system, the SRA, a smart reflow analyzer that can provide the customer with information about their machines: Is the airflow adequate? Is there proper heat transfer to the product? Is this data uniform from week to week and month to month? Miles explains how the SRA uses the latest in laser technology to track conveyor speed and heat transfer more accurately than ever.  

The productronica event is one of the world’s leading trade fairs for electronics development and production. The productronica trade fair is held on alternating years, at the Messe München in Munich, Germany. The next productronica will be held November 16-19, 2021.

Watch video below:

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.