Dow Introduces First Solventless Silicone Conformal Coating


Reading time ( words)

Dow (NYSE: Dow) introduced today at IPC APEX EXPO 2020 new DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating, the industry’s first solventless silicone conformal coating with an ultraviolet (UV) and moisture dual cure system for high throughputs. This new environmentally responsible silicone technology promotes sustainability, health and safety while reducing processing costs through automated spraying and fast, energy-efficient UV curing. Other silicones support UV curing, but none are conformal coatings with a low enough viscosity for spray coating and with a secondary moisture cure for shadowed areas. The new DOWSIL™ product also offers more reliable protection against stress and thermal cycling versus competitive materials.

Brian J. Chislea, senior electronics application engineer at Dow, will discuss the new DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating during two poster sessions at IPC APEX EXPO. The first session is scheduled for today, Tuesday, Feb. 4, from 10:00 to 10:30 a.m. Pacific Standard Time (PST). The second is scheduled for Wednesday, Feb. 5, from 4:30 to 5:00 p.m. PST.

“Dow has long been an innovative leader and developer of leading-edge conformal coating technologies that address our customers’ most pressing needs,” said Chislea. “DOWSIL™ CC-8030 Coating is an excellent example of this. “By listening closely to our customers, we responded with this first-of-its-kind material that can help electronics manufacturers meet their sustainability and productivity goals, and more.”

DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating is an environmentally progressive solution for protecting rigid printed circuit boards (PCBs), sensitive electronic components and fine-pitch designs from environments with airborne contaminants. This high-performance silicone conformal coating is formulated without benzene, toluene, ethylbenzene or xylene (BTEX) solvents. The new DOWSIL™ Conformal Coating also has a low modulus for delicate components and high elongation for reliable protection against stress. To provide an even greater level of PCB protection, DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating can be applied in multiple layers. Compared to leading acrylated urethane UV cure coatings, the new silicone-based Dow technology provides superior protection against thermal cycling.

A soft, medium-viscosity silicone, DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating has a rheology that is designed for high-throughput spray coating. Its dual cure technology combines speed with completeness of coverage for reduced work-in-process inventory. With UV curing from a standard mercury broad spectrum lamp at 300 mW/cm^2, the DOWSIL™ coating is tack-free after less than 10 seconds. Compared to thermal ovens that cure in minutes, UV ovens are also smaller and consume less energy. Further, the new coating’s secondary alkoxy moisture curing reaches any shadowed areas where UV light can’t penetrate, or UV curing is otherwise incomplete. Moisture curing also supports thicker coating and won’t add stress from thermal cycling.

DOWSIL™ CC-8030 UV and Moisture Dual Cure Conformal Coating is available globally.

Share

Print


Suggested Items

Practical Verification of Void Reduction Method for BTC Using Exposed Via-in-pad

12/16/2019 | Alfredo Garcia, et al, Sanmina and Nokia
The method explored in this article regards the use of exposed via-in-pad. A dedicated test vehicle was designed for two types of QFN components. The main variables accounted for were the component size, number of exposed vias in the thermal pad, via pitch, via size, and solder paste coverage. The responses sought in this experiment include a thermal pad void level and solder wicking down the via barrel with resulting solder protrusion on the opposite side of the PCB.

Optimizing Solder Paste Volume for Low-Temperature Reflow of BGA Packages

07/22/2019 | Keith Sweatman, Nihon Superior Co. Ltd
In this article, Keith Sweatman explains how the volume of low-melting-point alloy paste—which delivers the optimum proportion of retained ball alloy for a particular reflow temperature—can be determined by reference to the phase diagrams of the ball and paste alloys.

Failures and Reliability in Soldering

07/09/2019 | Michael Gouldsmith and Zen Lee, Thermaltronics
The definition of failure is "the lack of success in doing or achieving something, especially in relation to a particular activity." If the activity is concerning a soldering process, such a failure can have a downstream impact far beyond the actual solder joint. In this regard, it is first necessary to understand what constitutes a good solder joint because appearance is too often deemed a success.



Copyright © 2020 I-Connect007. All rights reserved.