Watch & Learn! Latest Installment of I-007 Micro Webinar Series Covers UL Approvals: Aerosol Spray Technology


Reading time ( words)

The eighth episode of the popular webinar series “Coatings Uncoated!” is now available to view. Author of The Printed Circuit Assembler’s Guide to...Conformal Coatings for Harsh Environments and topic expert Phil Kinner from Electrolube shares highly focused educational information on conformal coating and encapsulation. If you are in the assembly business, an EMS company, or responsible for specifying conformal coating and/or encapsulation, then this free series is for you.

In this segment, viewers will learn about a customer application involving aerosol spray coating. The customer reported failures due to arcing, creepage, and corrosion. Kinner explains the relevance of UL approvals and progresses through the details of the case study.

Electrolube_Play8.jpgWatch the latest segment, “Understanding UL Approvals: Aerosol Spray Technology,” in under six minutes!

In this engaging, 12-part webinar series, Kinner examines conformal coating chemistries in further detail, including their properties, applications, issues to be mindful of, and the processes you should follow to achieve a successful coating outcome. The entire “Coatings Uncoated!” webinar series can be viewed in an hour and covers a comprehensive range of hot topics and application-relevant case-study overviews, as well as back-to-basic subject matter and issues, such as condensation and contamination. Most of the 12 segments can be viewed in five minutes or less.

Got five minutes? Visit the Coatings Uncoated! webinar series site.

Share

Print


Suggested Items

This Month in SMT007 Magazine: Business Practices Drive the Smart Factory, Not the Other Way Around (Part 1)

03/19/2020 | I-Connect007 Editorial Team
In Part 1 of this conversation, Sagi Reuven— business development manager at Mentor, a Siemens Business—makes the case that smart factory implementations must start with traditional process analysis and improvement before the data capture process is useful. He also covers how sometimes the key to utilizing Industry 4.0 comes from a change in mindset rather than a drastic change or investment in new equipment or processes.

PCB Repair: Thoughtful Best Practices

12/31/2019 | Barry Matties, I-Connect007
Barry Matties recently spoke with Curtis Smith of Huntron about the critical factors that somebody needs to understand about the plant maintenance regarding the PCB repair process. The PCB repair process is not just a matter of just getting the equipment anymore but finding the right people with a troubleshooting mindset that can do it. A failed PCB can bring down an entire manufacturing line, and companies need to be able to repair the board and keep their manufacturing going.

Koh Young Opens New North American Facility

10/28/2019 | Andy Shaughnessy
Koh Young America recently opened its new corporate headquarters for the Americas outside of Atlanta, Georgia. I attended the open house and spoke with Joel Scutchfield, director of sales for the Americas, about the state-of-the-art facility and the benefits of relocating to the East Coast.



Copyright © 2020 I-Connect007. All rights reserved.