Watch & Learn! Latest Installment of I-007e Micro Webinar Series Features EV Charging Controller Case Study

Reading time ( words)

The eleventh episode of the popular micro webinar series “Coatings Uncoated!” is now available to view. In “Cycle Time Constrains Coverage,” topic expert Phil Kinner from Electrolube examines the trade-off between cycle time and coverage required while considering an electric vehicle charging controller case study. If you are in the assembly business, an EMS company, or responsible for specifying conformal coating and/or encapsulation, then this free series is for you.

Watch segment, “Cycle Time Constrains Coverage,” in just 7 minutes! The previous segments of “Coatings Uncoated!” are also available to watch free.

In this engaging, 12-part webinar series, Kinner examines conformal coating chemistries in further detail, including their properties, applications, issues to be mindful of, and the processes you should follow to achieve a successful coating outcome. The entire “Coatings Uncoated!” webinar series can be viewed in an hour and covers a comprehensive range of hot topics and application-relevant case-study overviews, as well as back-to-basic subject matter and issues, such as condensation and contamination. Most of the 12 segments can be viewed in five minutes or less.

Got five minutes? Visit http://iconnect007.com/webinar/cu/.

Download Kinner’s companion book, The Printed Circuit Assembler’s Guide to Conformal Coatings for Harsh Environments, here.

08/21/2020 | I-Connect007 Research Team

First, we asked you to send in your questions for Happy Holden. Now, it’s Joe Fjelstad’s turn! Inventor, columnist, instructor, and founder of Verdant Electronics, Joe has been involved with rigid PCBs and flexible circuits for decades, and he’s ready to share some of his knowledge with our readers. We hope you enjoy “Just Ask Joe.”

04/22/2020 | I-Connect007

With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

04/14/2020 | Pete Starkey, I-Connect007

SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.