PDR Releases New GenX Large Cabinet X-ray Systems


Reading time ( words)

PDR X-ray Solutions is pleased to introduce its new GenX large cabinet X-ray systems. The GenX-90P and GenX-130P can now both accommodate PCB sizes up to 21" (533 mm) x 17.5" (445 mm) with oblique angle viewing up to 70°.

The new cabinets accommodate either 90kV or 130kV X-ray sources, and are upgradable in the field from 90kV to 130kV if your imaging needs change in the future. The detector also is field upgradable. The new, large cabinet models are available at an affordable price without compromising image quality.

GenX large cabinet X-ray systems can be configured with many sizes of flat panel detectors, or a versatile image intensifier for applications with a wide range of part sizes and imaging requirements. Custom algorithms also can be tailored to specific inspection needs.

GenX X-ray systems offer truly remarkable image clarity with proprietary HD camera and software. Additionally, the high performance X-ray systems offer programmable 4-axis (X,Y, Z 1/Z2) fully motorized motion control.

PDR systems are made in the USA with worldwide service and support, and one-year or multi-year warranties. PDR can help to determine the best X-ray source and detector depending on the application.

Share

Print


Suggested Items

Excerpt—The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 2

04/15/2021 | Brent Fischthal, Koh Young America
A limitation of many 3D optical inspection systems is the cycle time typically associated with processing millions of pixels to reconstruct a full 3D image using data captured from multiple channels. There should not be a compromise between 3D inspection and throughput. A successful inspection deployment should provide oversight for the process, not compromise, interrupt or slow that process.

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.

Real Time with...SMTAI 2020: Creative Electron Moves Toward Autonomous Systems

10/01/2020 | Real Time with...SMTAI
Andy Shaughnessy recently spoke with Dr. Bill Cardoso, CEO of Creative Electron, a provider of advanced X-ray inspection systems. Bill discusses some of the new technologies the company will demonstrate in their virtual booth at SMTAI, including a next-generation X-ray parts counter and a new software platform that offers better automation than ever. He also explains the company’s plan to migrate from automation to autonomous systems by using AI to help remove humans from the process.



Copyright © 2021 I-Connect007. All rights reserved.