Libra Industries Continues to Promote from Within


Reading time ( words)

Libra Industries, a privately-held systems integration and electronics manufacturing services (EMS) provider, is pleased to announce the promotion of Megan Connolly from Lead Soldering Tech to Supervisor.

In her new role, Connolly is responsible for overseeing hand soldering, THT prep and coating in Plant One. She has been with Libra Industries for four years, where she started out as the Lead of Hand Solder. Connolly attended the University of Toledo for Chemistry and Microbiology.

Libra Industries’ Plant One houses its corporate offices, New Product Introduction (NPI) Center as well as all board level assembly.

Libra Industries continues to invest to provide customized manufacturing solutions to help make its customers more competitive and improve their profitability. 

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.