Meet Sagi Reuven, I-Connect007 Columnist

Reading time ( words)

Meet Sagi Reuven, one of our newest I-Connect007 columnists! Sagi’s columns will offer PCBA manufacturers advice on Lean manufacturing with a focus on ROI and customers’ stories.

Sagi is a mechanical engineer and an MBA with experience in Mentor's layout design and simulation products. In his last role, he was the CEO and co-founder of a medical device company in the retinal imaging sector and consulted start-up companies. Sagi is currently a business development manager for the electronics industry, Siemens Digital Industries.

Read "Lean Digital Thread" in SMT Week Newsletter. Subscribe today!



Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Robustness Is Not the Same as Reliability

09/02/2020 | I-Connect007 Editorial Team
Bob Neves discusses a disconnect he sees in reliability testing between what’s being tested and what happens out in the field, as well as why most reliability tests these days should instead be considered robustness tests.

Via Reliability and Robustness in Today’s Environment

04/15/2020 | Happy Holden, I-Connect007
When Bob Neves dropped by the I-Connect007 booth at IPC APEX EXPO 2020 this year, Happy Holden took the opportunity to record the conversation. Bob had some startling and exciting updates on the testing of microvias and through-hole technology.

Copyright © 2020 I-Connect007. All rights reserved.