MacDermid Alpha’s Kester Brand to Exhibit at China International Optoelectronic Exposition


Reading time ( words)

The Kester brand of MacDermid Alpha Electronics Solutions, a world leader in the production of electronics soldering and bonding materials, will be represented by China Distributor, Shanghai Fairfield Electronic Technology Co., Ltd., at the China International Optoelectronic Exposition (CIOE) in Shenzhen, China from September 9-11. 

Kester will be highlighting its tacky solder flux and solder paste portfolio. Kester Tacky Solder Fluxes (TSFs) are the industrial standard for Flip Chip and BGA Sphere Attach. With viscosities optimized for high speed application and holding of a chip or sphere in place prior to reflow, Kester TSFs enable wide process windows for our users. Known for their active soldering, Kester TSFs ensure good electrical connections on known good die and components. Featured products include TSF-6522RH, TSF-ULR18, and TSF-WS917.

Additionally Kester will exhibit three of its leading solder pastes. Kester NP560 is a no-clean, lead-free, halogen-free solder paste that has redefined the voiding standard for PCB assembly. This paste consistently delivers paste transfer efficiencies of 0.50 to 0.55 AR and is fully capable of printing and reflowing 01005 components, even in air, with minimal graping behavior. Kester NP545 is a zero-halogen, lead-free, no-clean solder paste formula designed for consistency and repeatability, and Kester NP505-HR is a zero-halogen, lead-free, no-clean solder paste formula developed specifically for high reliability applications.

For more information on Kester’s Tacky Solder Flux and Solder Paste solutions, please visit Kester in Hall: 8, Booth No:8E161 or visit the www.kester.com.

China International Optoelectronic Exposition (CIOE 2020)
Dates: September 9-11, 2020
Venue: Shenzhen World Exhibition & Convention Center

About MacDermid Alpha Electronics Solutions
Through the innovation of specialty chemicals and materials under our Alpha, Compugraphics, Kester and MacDermid Enthone brands, we provide solutions that power electronics interconnection. We serve all global regions and every step of device manufacturing within each segment of the electronics supply chain. The experts in our Semiconductor Solutions, Circuitry Solutions, and Assembly Solutions divisions collaborate in design, implementation, and technical service to ensure success for our partner clients. Our solutions enable our customers’ manufacture of extraordinary electronic devices at high productivity and reduced cycle time. Find out more at MacDermidAlpha.com.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.