Indium Corporation Experts to Present at SMTAI


Reading time ( words)

Four Indium Corporation experts will share their industry knowledge and expertise during a live virtual exposition at SMTA International from Sept. 28-30.

The following technical papers from Indium Corporation experts will be featured:

  • Versatile TIM Solution with Chain Network Solder Composite by Dr. Ning-Cheng Lee, Vice President of Technology
  • An Alternative Lead-Free, Low-Temperature Solder with Excellent Drop Shock Resistance by Dr. HongWen Zhang, R&D Manager, Alloy Group
  • Fine Powder Investigation for Optimum Imperial 008004 Solder Paste Printing: Part I by Adam Murling, Assistant Engineering Manager—Technical Support
  • Process Optimization for Reducing Solder Paste Splatter During Reflow by Leon Rao, Senior Technical Support Engineer

Dr. Lee will also host the professional development course, Achieving High-Reliability for Lead-Free Solder Joints—Materials Consideration. 

Indium Corporation is a premier materials refiner, smelter, manufacturer, and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, India, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.