Interest Rising in Virtual Industries PRO-SERIES PEN-VAC Kit

Reading time ( words)

Virtual Industries Inc., a leading supplier of manual vacuum handling solutions, is pleased to announce that it is seeing increased interest in the market for its Black Plastic PRO-SERIES PEN-VAC™ Kit (V8910-BK-KIT-ESD). These vacuum pens are ideal for SMT assembly or for handling any parts that have a non-porous surface.

The PEN-VAC is totally self-contained with no batteries or hoses to get in your way. The kit comes with eight high-temp conductive silicone black vacuum cups with probes and vacuum pen holder.

The ESD-safe PEN-VAC Kit features a 5″ lightweight black plastic body with five bent probes mounted with High-Temp Conductive Silicone Black Vacuum Cup sizes 1/8″ (3.18mm), 3/16″ (4.76mm), 1/4″ (6.35mm), 3/8″ (9.53mm) and 1/2″ (12.7mm) diameter.

Three straight probes are mounted with high-temp conductive silicone black vacuum cup sizes 1/4″ (6.35mm), 3/8″ (9.53mm and 1/2″ (12.7mm) diameter. The kit includes a vacuum pen holder with eight locations for holding your probes and cups.



Suggested Items

Book Excerpt: The Printed Circuit Assembler’s Guide to Process Validation

12/24/2020 | Graham Naisbitt, Gen3 Systems
It is assumed that readers are familiar with manufacturing electronic circuit assemblies in accordance with IPC-J-STD-001 or IEC 61189-1; both are titled “Requirements for Soldered Electrical and Electronic Assemblies.” In October 2018, IPC-J-STD-001 Revision G was amended and released with a new Section 8 of the document titled “Cleaning.” The change was primarily the removal of a “cleanliness” level of 1.56 mg/square cm of NaCl equivalence. This small change has great significance in relation to how companies ensure the electrochemical reliability of their products.

Magnetically Aligned Novel ACA Revolutionizes 3D Chip Stacking

02/18/2016 | Dr. S. Manian Ramkumar, Rochester Institute of Technology
The use of anisotropic conductive adhesive (ACA) is not new within the electronics industry; however, drop-in replacements don't exist for lead-based and lead-free solder assemblies. Also, current ACAs require pressure and sequential assembly of components. In this article, Rochester Institute of Technology's Dr. S. Manian Ramkumar writes about a novel ACA that will help revolutionize the packaging industry.

Opportunities for 3D Printed Structural Electronics

01/28/2015 | Dr. Jon Harrop, IDTechEx
Today's 3D printers have many limitations, but the boundaries are being pushed and exciting developments are continuously being made. One of the most promising recent developments in the world of 3D printing is multimaterial printing, which holds the key to the emergence of 3D printed electronics.

Copyright © 2021 I-Connect007. All rights reserved.