NovaCentrix's Stan Farnsworth Reconfirmed as OE-A Board Chair


Reading time ( words)

NovaCentrix, the industry’s leading provider of photonic curing tools, conductive inks and the new PulseForge® Soldering high-intensity pulsed-light solution, is pleased to announce that Stan Farnsworth, Chief Marketing Officer, has been reconfirmed as the Chair of the Board of Directors of the OE-A (Organic and Printed Electronics Association) for the term 2021 to 2025. Farnsworth has served as the chair of the Board of Directors since 2019.

On behalf of the Board Stan Farnsworth thanked the OE-A members for their support and trust, outlining the OE-A’s vision. “We see increasing convergence between the technologies of printed, organic, and large-area electronics, and product direction in applications such as consumer electronics, automotive/mobility and smart living. At the OE-A we are bringing technologies and markets together, building an inclusive community for members and partners to be successful. Innovation is stronger than ever, and we are excited about the opportunities in front of us.”

OE-A (Organic and Printed Electronics Association) is the leading international industry association for the emerging technology of organic and printed electronics. Representing the entire value chain, OE-A provides a unique platform for local and international cooperation between companies and research institutes. For more information visit www.oe-a.org.

About NovaCentrix

NovaCentrix partners with you to take products from inspiration to implementation. Through our innovative PulseForge® tools and Metalon® Inks products, we continue to enable advancements in printed electronics for researchers, product innovators, and manufacturers as technologies and markets evolve.

A member of the OE-A since 2009, learn more about NovaCentrix’s products and services by visiting www.NovaCentrix.com.

Share




Suggested Items

Solder Paste Printing and Optimizations for Interconnecting Back Contact Cells

07/26/2022 | Narahari S Pujari and Krithika PM, MacDermid Alpha Electronics Solutions
The interdigitated back contact (IBC) is one of the methods to achieve rear contact solar cell interconnection. The contact and interconnection via rear side theoretically achieve higher efficiency by moving all the front contact grids to the rear side of the device. This results in all interconnection structures being located behind the cells, which brings two main advantages. First, there is no frontside shading of the cell by the interconnection ribbons, thus eliminating the need for trading off series resistance, losses for shading losses when using larger interconnection ribbons. Second, a more homogeneous looking frontside of the solar module enhances the aesthetics.

Book Excerpt: 'The Printed Circuit Assembler’s Guide to… Solder Defects'

06/07/2022 | I-Connect007 Editorial Team
Solder defects in surface-mount technology (SMT) assembly have been an issue for decades. Further, the combined challenges of Pb-free soldering and ever-increasing miniaturization have resulted in new or exacerbated defects in electronics assembly, but there are proven ways to avoid defects. This book will be especially beneficial to PCB assemblers in improving their assembly processes and the reliability of the end-product, eliminating field failures, and reducing costs.

KIC Adds Wave Monitoring Technology to Industry 4.0 Ecosystem for Thermal Processes

04/13/2022 | Andy Shaughnessy, I-Connect007
At the SMTA Dallas Expo, Andy Shaughnessy sat down with Miles Moreau of KIC to discuss the company’s latest offering in wave process inspection technology. Miles also explains how KIC’s early focus on automated real-time process monitoring has enabled them to become a leader in Smart factory implementation.



Copyright © 2022 I-Connect007. All rights reserved.