Rehm Thermal Systems Takes a Holistic Approach to Environmental Management


Reading time ( words)

The topic of sustainability, energy efficiency, resource conservation is increasingly being discussed and is accordingly a major concern for Rehm Thermal Systems. This is reflected in the introduction of an environmental management system (in accordance with DIN EN ISO 14001:2015) and the associated Rehm Climate Strategy 2030. It forms the basis for an even more conscious handling of energy, resources, and the continuous improvement of energy efficiency in the company. With a CO2-neutral trade fair stand, a further signal is now being sent to not only analyse the products and manufacturing processes, but to pursue a holistic approach in the area of environmental management.

Sustainability, climate protection and reduction of CO2 emissions are rarely associated with a trade fair appearance or stand. What is known are climate-neutral letter mailings, climate-neutral print products or climate-neutral air travel. Admittedly, there will not be a completely emission-free exhibition stand. However, it is even more important to reduce CO2 emissions to a possible minimum. Like all climate-neutral services and products, the climate-neutral exhibition stand is based on the principle of offsetting CO2 emissions that have arisen, avoiding, or reducing environmental pollution and recycling as many materials as possible.

The emissions that cannot be avoided are offset afterwards through the purchase of emission reduction certificates. The certificates, which are recognised according to international guidelines, are used to invest in selected environmental projects worldwide. For Rehm Thermal Systems, it is important to support a regional project where the concrete implementation and success can be tracked at any time. Therefore, the decision was made to support humus processing at a farmer in the immediate vicinity of the company headquarters in Blaubeuren – in Berghülen, only 6 km away. Lena and Johannes Mayer have been running an organic farm in Berghülen for years. The dairy cows on their farm are kept free-stall with grazing, while their offspring remain out on pasture all summer long. In addition, the farmland is managed according to the principle of regenerative organic farming. The entire grassland, as well as part of the arable land, serves as fodder for the animals. Catch crops and under sown crops provide diversity in arable soils and additionally provide a permanent forage base for insects.

The farmer is particularly committed to humus formation and the associated CO2 compensation. And this is where Rehm comes in: We compensate for the CO2 emissions caused by the company’s participation in the Productronica trade fair by supporting the cultivation of humus in Johannes Mayer's fields – a win-win situation for both sides.

But how does that work exactly? The green plant absorbs CO2 through photosynthesis and converts it into oxygen and carbon compounds. In the process, the oxygen is released into the atmosphere and the carbon remains bound in the plant. A large part of the carbon compounds is released into the soil through so-called root exudates. These exudates serve as food for the soil biology. In return, the plant receives the necessary nutrients returned in symbiosis with the soil biology. That creates natural soil fertility. This forms the basis for the natural removal of CO2 from the atmosphere to be stored firmly in the soil as carbon compounds. Only a green living plant is capable of this. This principle is also described by the term “liquid carbon pathway”.

But it is not only since the possibility of creating a CO2 offset through emissions trading that Rehm Thermal Systems has focused on sustainability and resource conservation. For years, environmental protection has already been taken into account during the development of a new system. Rehm's development engineers are concerned with future-oriented, sustainable solutions for innovative products. Together with scientific institutes, universities, customers and partners, we develop concepts for product optimisation and further development, especially with regard to energy management and resource conservation.

Today, customers already benefit significantly from the use of efficient technologies in the systems of the plant manufacturer from Blaubeuren and can thus work sustainably and economically. The modular design guarantees an almost tailor-made system for every electronics manufacturer that can be operated at high capacity - with maximum service life. 

This protects our environment - now and in the future.

Share

Print


Suggested Items

High-reliability, Low-temperature Solder Alloys

05/18/2020 | Dr. Pritha Choudhury, MacDermid Alpha Electronics Solutions
Increased digitalization and greater connectivity have been driving miniaturization and more complex and integrated designs in electronics. As the real estate on PCBs shrinks, so does the size of packages. However, the drive for finding design solutions for increased performance has continued to expand. The solder joint is an essential part of assemblies for electronic devices as it provides electrical, thermal, and mechanical connections. Therefore, soldering materials have been evolving to enable such a technological revolution.

Practical Verification of Void Reduction Method for BTC Using Exposed Via-in-pad

12/16/2019 | Alfredo Garcia, et al, Sanmina and Nokia
The method explored in this article regards the use of exposed via-in-pad. A dedicated test vehicle was designed for two types of QFN components. The main variables accounted for were the component size, number of exposed vias in the thermal pad, via pitch, via size, and solder paste coverage. The responses sought in this experiment include a thermal pad void level and solder wicking down the via barrel with resulting solder protrusion on the opposite side of the PCB.

Optimizing Solder Paste Volume for Low-Temperature Reflow of BGA Packages

07/22/2019 | Keith Sweatman, Nihon Superior Co. Ltd
In this article, Keith Sweatman explains how the volume of low-melting-point alloy paste—which delivers the optimum proportion of retained ball alloy for a particular reflow temperature—can be determined by reference to the phase diagrams of the ball and paste alloys.



Copyright © 2021 I-Connect007. All rights reserved.