GÖPEL electronic's SCANFLEX II Controller Now Also Available as PXIe

Reading time ( words)

Boundary Scan Controllers serve as the interface between the test PC/software and the target assembly in manufacturing or development. Based on state-of-the-art FPGA, SCANFLEX II controllers enable the application of powerful test and validation methods. They use instruments embedded in the electronic assemblies under test with reduced physical access to test and program them. In this context, the SFX II PXIe C4/FXT offers a unified control platform with 4 independent, true parallel Test Access Ports (TAP) for up to 100MHz. This enables the synchronised execution of embedded test, debug and programming operations via boundary scan (IEEE1149.x), processor emulation, chip integrated instruments or the embedded diagnostics procedure. Basic elements include a programmable, multifunctional 32-channel I/O mixed-signal unit with signal frequencies up to 100MHz, programmable TAP protocols for a variety of processor debug interfaces. The SFX II PXIe C4/FXT is controlled via a PXI Express x2 interface.

Due to its multifunctional architecture, the SFX II PXIe C4/FXT offers almost unlimited possibilities to combine all technologies, including mixed signal tests, flexibly and with highest performance on only one platform. This solution approach not only offers the advantage of significantly improved test depth for complex boards even without the use of needles, but it also minimises the number of necessary instruments. For example, embedded functional tests can be used to detect and diagnose dynamic faults, while the features for in-system programming (ISP) for flash components, micro-controllers and PLD/FPGA make other stand-alone programmers superfluous.

Thanks to a multitude of special extension and configuration features, the SFX II PXIe C4/FXT is also already equipped for future embedded technologies for testing, validation, debugging and programming. Using the PXI Express platform, external function tests can thus be easily combined with embedded procedures. The system is suitable for both development and production. As a result, it can be used for prototype design verification, hardware debugging, Flash programming, gang testing of high-volume units and diagnosing defective assemblies from the field to obtain the necessary repair information.



Suggested Items

Copyright © 2021 I-Connect007. All rights reserved.