Jade Micron Installs Hentec/RPS Pulsar Solderability Test System in Singapore


Reading time ( words)

Hentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Jade Micron Pte Ltd. has purchased a Pulsar solderability system. 

The Pulsar utilizes the highly proven dip-and-look test method that is a qualitative type test performed by comparative analysis after specimens are dipped in a bath of flux and molten solder.  An advantage of the dip-and-look method is since it is based on comparative analysis it can be performed rapidly by shop floor personnel with minimal training as well as requiring significantly lower capital investment then a wetting balance test system. 

The Pulsar solderability test system complies with all applicable solderability test standards including MIL-STD-883 Method 2003, IPC J-STD-002 and MIL-STD-202 Method 208. 

Share

Print


Suggested Items

Ron Lasky: A Perspective on Writing About Solder Defects

12/02/2021 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Dr. Ron Lasky About "The Printed Circuit Assembler’s Guide to... Solder Defects." Ron is a full professor at Dartmouth College, but works part-time at Indium Corporation, helping their customers solve defects. This I-Connect007 eBook, he says, is a compilation of all he’s learned over the years as well as the deep technical knowledge of the team at Indium.

Design to Production Flow: DFT and Test Coverage Using Industry 4.0 Principles to Produce Good Products

12/01/2021 | William Webb, ASTER Technologies
Achieving design for test (DFT) can be challenging for both design and test groups, as sometimes both expect that the other will be the one to manage DFT. The design and test groups might be in the same organization, or they could be an OEM vs. an EMS company. It works best if both the design and test groups are engaged in the process of DFT and trying to achieve the goal of the best test coverage and lowest rate of field returns.

MacDermid Alpha's Scott Lewin Knows What's Important in Solder

11/18/2021 | Nolan Johnson, I-Connect007
Scott Lewin, regional marketing manager for the Americas for MacDermid Alpha, leads Nolan Johnson through what's important in solder, with various scenarios and their impact on EMS efficiency and quality. As Scott explains, “It’s not what’s new that’s important to the customer; it’s what’s important.” If you didn’t make it to SMTA International in Minneapolis, don’t worry. We have interviews with the SMT segment’s top engineers and managers. Visit realtimewith.com now for all the interviews produced by I-Connect007 in partnership with SMTA at this year's event.



Copyright © 2021 I-Connect007. All rights reserved.