Now Playing: Part 3 of 'Predicting Reliability in Electronics' Micro Webinar


Reading time ( words)

Watch & Learn! 

In this engaging, 11-part micro webinar series, topic experts Graham Naisbitt and Chris Hunt examine the history of the influences of Electrochemical Migration (ECM) and the evolving use of Surface Insulation Resistance Testing (SIR) that has been developed over the past 25 years by GEN3 and its association with the British National Physical Laboratory. GEN3 and NPL have created the standard that has now been in widespread use around the world since the turn of the millennium.  

The third episode, “ECM Examples,” can be viewed in under five minutes. Presenters share information on ECM types, including examples from Bosch, HP, and NP. Presenters also discuss ECM requirements and more.  

Designed to complement GEN3’s book, The Printed Circuit Assembler’s Guide to...Process Validation, this entire webinar series can be viewed in about an hour and covers a comprehensive range of topics surrounding the four groundbreaking test standards published between 2019 and 2021 that set the scene for Objective Evidence and its widespread influence throughout the world of electronics, whether in the high reliability arena of space, medical, automotive or general industrial applications.  

Visit Predicting Reliability in Electronics and start watching, free, today! 

Share

Print


Suggested Items

GEN3 Webinar, Part 9 Released: SIR, Additional Information

01/19/2022 | I-Connect007 Editorial Team
In this engaging, 11-part micro webinar series, topic experts Graham Naisbitt and Chris Hunt examine the history of the influences of Electrochemical Migration (ECM) and the evolving use of Surface Insulation Resistance Testing (SIR) that has been developed over the past 25 years by GEN3 and its association with the British National Physical Laboratory. GEN3 and NPL have created the standard that has now been in widespread use around the world since the turn of the millennium. The ninth episode, “SIR, Additional Information” can be viewed in just under four minutes. Presenters discuss test duration, number of coupons, and whether SIR is good to use for qualification testing. Also covered in this segment: SIR and objective evidence.

GEN3 Webinar, Part 8 Released: New IEC Standards—A Walk Through

01/12/2022 | I-Connect007 Editorial Team
In this engaging, 11-part micro webinar series, topic experts Graham Naisbitt and Chris Hunt examine the history of the influences of Electrochemical Migration (ECM) and the evolving use of Surface Insulation Resistance Testing (SIR) that has been developed over the past 25 years by GEN3 and its association with the British National Physical Laboratory. GEN3 and NPL have created the standard that has now been in widespread use around the world since the turn of the millennium. The eighth episode, “New IEC Standards—A Walk Through” can be viewed in just over five minutes. Presenters discuss scope, measurement technique, the B52 and field gradient, dummy components and the test chamber.

GEN3 Webinar, Part 7 Released: SIR Test Coupon Design

01/05/2022 | I-Connect007 Editorial Team
In this engaging, 11-part micro webinar series, topic experts Graham Naisbitt and Chris Hunt examine the history of the influences of Electrochemical Migration (ECM) and the evolving use of Surface Insulation Resistance Testing (SIR) that has been developed over the past 25 years by GEN3 and its association with the British National Physical Laboratory. GEN3 and NPL have created the standard that has now been in widespread use around the world since the turn of the millennium.



Copyright © 2022 I-Connect007. All rights reserved.