YINCAE Launches Fully Flux Residue Compatible, Room Temperature Fast Flow, Reworkable Underfill SMT 88UL2

Reading time ( words)

YINCAE is excited to announce that we have developed and upgraded SMT 88UL to SMT 88UL2, a fully flux residue compatible, room temperature fast flow and easily reworkable underfill. 

The compatibility of underfill and flux residue has long been a traditional issue in the electronic industry. This compatibility issue normally leads to underfill flow issue, underfill voids, underfill delamination and solder extrusion during the double reflow process and automotive application. Typically, it is too costly to clean the flux residue in SMT assembly. SMT 88UL2 is designed to be fully compatible with the flux residues of almost all solder paste from major manufacturers. SMT 88UL2 can fast flow into any gap size (less than 1) at room temperature and fast cure at lower temperatures without any flow and void issues eliminating cleaning flux residue. Our SMT 88UL2 can withstand multiple 260C reflow process without any delamination, solder extrusion and solder ball issues without cleaning flux residue. It has demonstrated excellent drop and thermal cycling performance.

This material can be used as an underfill for flip chip, chip scale package, ball grid array devices, package on package, and land grid array applications. It is also suitable for bare chip protection in a variety of advanced packages such as memory cards, chip carriers, hybrid circuits and multi- chip modules. It is designed for high production and an environment where process speed and thermal dissipation are key concerns.



Suggested Items

Real Time with... IPC APEX EXPO: PCBA Cleaning Trends

01/26/2022 | Real Time with...IPC APEX EXPO
Tom Forsythe of KYZEN speaks with Editor Nolan Johnson about the launch of the newest addition to their AQUANOX line. They also discuss trends in cleaning of PCB assemblies and what EMS companies can expect in the future. Watch this interview below or click here to view on our show page. If you didn't make it to IPC APEX EXPO, don't worry. We're bringing you coverage of the week's events, from ribbon cutting to teardown.

SMTAI 2021: Rob DiMatteo Turns Up the Heat at BTU

12/15/2021 | Nolan Johnson, I-Connect007
At SMTA International 2021, Nolan Johnson spoke with Rob DiMatteo of BTU International about the current shift in market drivers, pain points from customers, and what he expects to see in the near future. Chip shortages and port delays are just two of the challenges facing BTU’s customers. As general manager of BTU, DiMatteo wants his company to excel at customer service despite these challenges. He also previews a new flux management technology for keeping reflow ovens extremely clean, calling it a significant breakthrough.

IPC APEX EXPO 2022: What to Expect Regarding COVID Restrictions

12/08/2021 | Alicia Balonek, IPC
As IPC is adhering to California Department of Public Health Guidelines, proof of COVID vaccination or a negative test will be required to attend IPC APEX EXPO 2022. IPC has partnered with InHouse Physicians (iHP) for attendees to upload their proof of vaccine or negative COVID test results in advance of arrival at IPC APEX EXPO. Once information is uploaded via the iHP link, a trained medical professional will review the information within 24 hours and provide an email confirmation with a green check mark indicating they’ve been cleared for entry.

Copyright © 2022 I-Connect007. All rights reserved.