MacDermid Alpha Electronics Solutions Takes the Double at Mexico Technology Awards


Reading time ( words)

MacDermid Alpha Electronics Solutions, global supplier of integrated solutions from our Circuitry, Assembly and Semiconductor divisions that provides unmatched capabilities in electronics design and manufacturing, is delighted to announce it has received two Mexico Technology Awards in the category of for the category Solder Paste, with ALPHA’s OM-565 HRL3 low temperature solder paste, and in the category Conformal Coatings, for Electrolube’s UVCLX UV Curable Polyurethane coating. Both awards were presented to MacDermid Alpha Electronics Solutions during a ceremony that took place during the SMTA Guadalajara Show, Sept 21-22.    

Designed to mitigate warpage induced defects in temperature sensitive chip-scale packages, ALPHA OM-565 HRL3 low temperature solder paste enhances electrochemical performance over existing low melt point solders and provides excellent compatibility when used in combination with alternative ALPHA solutions for contact rework applications. The solder paste enables superior wettability to minimize post reflow defects such as Non-Wet-Open (NWO) and Head-in-Pillow (HIP). Next generation devices require a larger footprint and thinner form factor design that deliver superior processing power over existing technologies. These next generation packages create challenges for assembly at traditional SMT reflow temperatures. ALPHA OM-565 HRL3 enables a reduction in peak reflow down to 175 °C to mitigate common warpage induced defects such as HiP and NWO to improve assembly yields.

Electrolube’s UVCLX, is considered a ‘greener’ coating than many others but also delivers high-performance results. Formulated with 75% bio-organic content, UVCLX protects electronic circuitry against the harshest of environments, particularly within the automotive industry where components are at high risk from chemical attack.  Applied via a selective coating machine, UVCLX exceeds traditional UV Cure Coatings by being touch dry after just a short exposure to the correct wavelength of UV light. UVCLX guarantees full cure in less than 24 hours by virtue of the secondary chemical cure mechanism, which ensures that even shadowed areas are fully cured in a matter of hours. In comparison to traditional UV Cure Coatings, that can require weeks at a time for a complete cure and still with some shadowed areas remaining uncured, UVCLX ensures a much faster work in progress.

MacDermid Alpha Electronics Solutions enables electronics interconnection through the innovative specialty chemicals and materials from our Alpha, Compugraphics, Electrolube, Kester, and MacDermid Enthone brands. We serve all global regions and all steps of device manufacturing within every segment of the electronics supply chain. The experts in our Semiconductor Solutions, Circuitry Solutions, and Assembly Solutions divisions collaborate with OEMs and fabricators in the implementation of new technologies that redefine what is possible in device design. Our world class technical service is constantly at hand to ensure optimized outcomes in yield and productivity. Our solutions can increase throughput, reduce carbon footprints, lower total cost of ownership, and enable electronics innovation.

Share




Suggested Items

Passing the Test With SMTA’s Rob Boguski

09/14/2022 | Andy Shaughnessy, I-Connect007
I recently spoke with Rob Boguski, president of Fremont, California-based Datest and an SMTA vice president and board member. Rob explained why today’s test customers are asking for more information than the traditional pass/fail, offers a preview of SMTA International, and gives an update on SMTA’s planning strategy for the next five years.

Four Silver Linings in the Stormy Clouds of Pandemic, Supply Chain, and Inflation

09/14/2022 | Dr. Ronald C. Lasky, Indium Corp.
It may be difficult to see any bright spots in the current and recent economic situation. We have all experienced the devastation of the pandemic, supply chain issues, and most recently, inflation. However, as a senior technologist for an international materials supplier (Indium Corporation) and a professor of engineering at an Ivy League research university (Dartmouth College), I offer these four silver linings for those of us in the electronics industry.

Solder Paste Printing and Optimizations for Interconnecting Back Contact Cells

07/26/2022 | Narahari S Pujari and Krithika PM, MacDermid Alpha Electronics Solutions
The interdigitated back contact (IBC) is one of the methods to achieve rear contact solar cell interconnection. The contact and interconnection via rear side theoretically achieve higher efficiency by moving all the front contact grids to the rear side of the device. This results in all interconnection structures being located behind the cells, which brings two main advantages. First, there is no frontside shading of the cell by the interconnection ribbons, thus eliminating the need for trading off series resistance, losses for shading losses when using larger interconnection ribbons. Second, a more homogeneous looking frontside of the solar module enhances the aesthetics.



Copyright © 2022 I-Connect007. All rights reserved.