Specialty Coating Systems to Host Webinar

Reading time ( words)

SCS.JPGSpecialty Coating Systems (SCS) is pleased to announce that it will host an educational webinar entitled, “Ultra-thin Conformal Coatings: Enhancing Component Protection and Reliability” on Thursday, July 23, 2015, at 2:00 p.m. ET | 11:00 a.m. PT. The webinar will be conducted by Rakesh Kumar, PhD, SCS Vice President of Technology, and Tim Dietrich, Sr. Customer Service Manager, and will be available for registration at SCSwebinars.com.

As demands for performance and reliability in the electronics, aerospace, medical device, automotive and defense industries continue to increase, engineers are challenged to find protection solutions for components that are ever-increasing in their complexity and decreasing in their dimension. For a number of years, conformal coatings have offered a level of protection to components, but many simply do not offer the level that is required for today’s and tomorrow’s complex technologies.

This webinar will provide an overview of Parylene conformal coatings and how they differentiate themselves from other coating materials.  Typically applied in thicknesses from angstroms to tens of microns, Parylenes meet design challenges by providing conformal coatings that are ultra-thin, transparent and inert.  Examples of applications that have benefited from the properties of Parylene include circuit card assemblies, MEMS, LEDs, sensors, lab-on-a-chip devices, pacemakers, stents, electrosurgical tools, cochlear and ocular implants, neurostimulation devices, and elastomers, to name only a few.

In addition to an overview of Parylene, advances in adhesion technologies for challenging substrate materials also will be discussed. AdPro Plus® and AdPro Poly® have been specifically developed to address adhesion challenges and are demonstrated with evaluation data.

The webinar also will review recent advances in Parylene technologies, including a review of microRESIST® Antimicrobial Parylene Technology, designed to aid in the reduction of healthcare-associated infections that can be caused by both surface and implant devices.

Device and component manufacturers over a broad industry spectrum seek key competitive advantages through the use of conformal coatings, with the driving force to enhance one or more key properties.  Included may be electrical and barrier properties, dry film lubricity, stabilization of delicate microstructures or biocompatibility.  As materials and applications continue to advance, Parylene coatings are increasingly being used to enhance the reliability of innovative technologies.

For more information about SCS and how Parylene conformal coatings can protect your advanced technologies, contact SCS at +1.317.244.1200 or visit scscoatings.com.

About Specialty Coating Systems

Headquartered in Indianapolis, Indiana, SCS is the worldwide leader in Parylene conformal coating services, systems, and materials.  SCS has over 40 years of application experience and expertise in the medical device, electronics, automotive and military industries.  With eleven coating facilities throughout the Americas, Europe, and Asia, SCS leverages its worldwide Parylene coating resources in order to meet its customers’ needs on a global basis.  The company also offers industry-leading liquid coating systems, including spray, spin and dip coating systems, and ionic contamination test systems.  To find out more about SCS and its industry-leading product lines, visit the company’s website at www.scscoatings.com.



Suggested Items

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.

Copyright © 2020 I-Connect007. All rights reserved.