PEMTRON Launches New Eagle 8800 3D AOI with Color Imaging


Reading time ( words)

Pemtron Technology announces the launch of the Eagle 8800 3D AOI system with revolutionary new color imaging. Color imaging enhances accuracy and precision of Automated Optical Inspection (AOI) providing a more true-to-life inspection image for the operator and reducing the rate of false calls. Because color imaging brings a life-like dimension to AOI inspection, there’s no need for the operator to use a microscope, and Pemtron’s color imaging system gives the software the ability to identify features on the surface of the PCB, from solder paste prints to lifted leads. Inspection is faster, more selective, and more accurate.

The Eagle 8800 features fast program setup, 100% true 3D AOI, an extremely low false call rate, plus complete SPC capability, and creates a closed loop solution when paired with Pemtron’s TROI Series Solder Paste Inspection (3D SPI) system which also offers color imaging.

About PEMTRON Technology

PEMTRON Technology specializes in the design and manufacturing of 3D AOI and SPI measurement and inspection solutions for the global circuit board assembly and semiconductor markets. Sales and support centers are located globally, and PEMTRON has established sales and service offices on Mexico, as well as the U.S. East and West coasts with headquarters in Los Angeles, California. For more information, visit www.PEMTRON.com, or contact Pemtron Technology (East), 470 Olde Worthington Road, Suite 200, Columbus, OH 43082; Tel. Direct: 800-850-8764800-850-8764, Fax: 800-850-8764. Main office location: 3450 Wilshire Blvd., Suite 108-73, Los Angeles, CA 90010.

Share

Print


Suggested Items

electronica Virtual 2020: Automotive Conference Keynotes

11/16/2020 | Pete Starkey, I-Connect007
While not the same as battling with the traffic to catch the early flight to Munich, followed by an S-Bahn into the city and a crowded U-Bahn to the Messe, electronica 2020 went virtual. Pete Starkey details the Automotive Conference—an event he was particularly keen to attend.

Real Time with… SMTAI 2020: Technical Conference Review

10/06/2020 | Real Time with...SMTAI
SMTAI 2020, which was converted to a virtual event, took place from September 28–30. I attend every year, but since there was no keynote in the virtual format, I went straight to the technical conference. This event covered a broad range of topics related to everything in assembly. Over 90 technical presentations are available, but this report covers just some of the sessions I attended.

Real Stories of Applied Advanced Analytics in the Electronics Manufacturing Smart Factory

08/26/2020 | Derek Ong, BscEE, Keysight Technologies
The smart factory is starting to become a reality, as part of the overarching Industry 4.0 paradigm. With the technology enablers, such as industrial IoT (IIoT) and cloud computing, electronics manufacturing operational technology (OT) are on a converging course with traditional information technology (IT). Beyond the challenges of data acquisition and transformation, the true “proof in the pudding” is in the quick ROI from advanced analytics. We will share examples of successful, profitable implementation of applied machine learning (ML) in the electronics manufacturing line, where measurement science meets data science.



Copyright © 2020 I-Connect007. All rights reserved.