AIM to Participate in SMTA Guadalajara Expo & Tech Forum


Reading time ( words)

AIM Solder, a leading global manufacturer of solder assembly materials, will highlight their new M8 No Clean Solder Paste along with their full line of solder assembly materials at the SMTA Guadalajara Expo & Tech Forum, scheduled to take place October 14th – 15th, 2015 at Hotel Riu Guadalajara in Guadalajara, Mexico. In addition to participating, AIM will also be represented as a 2015 SMTA Guadalajara sponsor for this important chapter.   

Developed in combination with T4 and finer mesh leaded and lead-free alloy powders, M8 provides stable transfer efficiencies required for today’s challenging applications. A novel activator system provides powerful, durable wetting action accommodating a wide range of profiling processes and techniques. M8 eliminates HiP defects on BGA and reduced voiding on QFN/BTC components while producing bright shiny solder joints, leaving minimal, high purity residue engineered to be safely left in place.

Additionally, AIM will highlight its liquid fluxes, tin/lead and lead-free alloys, including SN100C. To discover all of AIM’s products and services, including lead-free and halogen-free solder, visit the company at SMTA Guadalajara Expo & Tech Forum or at www.aimsolder.com for more information.

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, visit www.aimsolder.com.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.