Transition Automation Unveils New Permalex Pro Reinforced Squeegee Line


Reading time ( words)

Transition Automation, Inc., announces a new high performance product line for pump printing applications. The Permalex-Pro “R” series is a reinforced blade assembly which enables high speed continuous operation for extended high volume SMT printing. The new process developed by Transition Automation adapts a steel rod to the non-printing edge of the squeegee which aids the user in handling and assembly and improves the straightness and durability of the squeegee during customer installation and operation. The new product is available  for delivery in 3-5 days A.R.O. 

About Transition Automation, Inc.

Transition Automation, Inc. is a worldwide leader in the manufacturing and distribution of Permalex® Edge Metal Squeegees, holder systems, and advanced SMT printing systems.  Founded in 1989, Transition Automation, Inc. continues to advance the state of the art in surface mount solder paste printing by innovating the critical and high-cycle squeegee component of the SMT assembly process.  The PrinTEK Series of SMT benchtop printers are renown for their ability to produce high quality results for ultra-fine pitch SMT in high-mix production situations. The company is located at 5 Trader Circle, Building D, Tyngsboro, Ma 01879 USA . Phone: 978-649-2400; Fax 978-649-2402, Web: www.transitionautomation.com

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.