Alpha Receives 2015 Corporate Partnership Award from SMTA


Reading time ( words)

Alpha, the world leader in the production of electronic soldering and bonding materials, was honored with the 2015 Corporate Partnership Award from SMTA during the keynote breakfast at the recently held SMTA International Conference & Exhibition in Rosemont, Illinois.

Alpha was selected for its exceptional support of the SMTA.  As a corporate member for the past 30 years, Alpha has made many contributions to the SMTA by supporting and participating in technical conferences and exhibitions, local chapter events and encouraging membership.

The award was presented by SMTA board member Scott Priore from Cisco Systems and accepted by Bob Davis, Vice President of Sales for Alpha.  “We are thrilled to receive the Corporate Partnership award from SMTA,” said Bob Davis. “This organization provides a platform where we can share our knowledge, develop solutions and cultivate emerging technologies.  Alpha looks forward to a long-term, beneficial relationship with the SMTA.”

CLICK HERE to watch Vice President of Sales for Alpha, Bob Davis’s Interview from SMTAI

About Alpha

Alpha, a business unit of Alent plc, is the global leader in the development, manufacturing and sales of innovative specialty materials used in a wide range of industry segments, including electronics assembly, power electronics, die attach, LED lighting, photovoltaics, semiconductor packaging, automotive and others.

With a unique global presence in over 30 locations throughout the Americas, Europe and Asia Pacific regions, Alpha supplies a full line of ALPHA® electronics assembly material products, including Solder Paste, Exactalloy® Solder Preforms, Cored Solder Wire Solder, Wave Soldering Fluxes, Bar Solder Alloys, and Stencils.  It offers die attach product technologies to the power electronics segment in its Argomax®, Atrox™, Maxrel™, and Fortibond™ brands.

For the LED segment, Alpha offers its Lumet™ products covering applications from die attach to systems assembly in the LED manufacturing process.  Alpha also offers product technologies for the Photovoltaic segment, including high performance liquid fluxes and solder alloys for producing standard ribbon and bus bar, as well as, liquid fluxes, solder pastes,  cored wire, conductive adhesives and preforms for use in used in PV module assembly. Also, Alpha’s Advanced Materials unit is the leader in electronic polymers and solder materials for semiconductor packaging applications. 

Since its founding in 1872, Alpha has been committed to developing and manufacturing the highest quality specialty materials.  For more information, visit www.alpha.alent.com.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.